IMR OpenIR
High-speed extrusion of dilute Mg-Zn-Ca-Mn alloys and its effect on microstructure, texture and mechanical properties
Jiang, MG; Xu, C; Nakata, T; Yan, H; Chen, RS; Kamado, S; Chen, RS (reprint author), Chinese Acad Sci, Inst Met Res, Grp Magnesium Alloys & Their Applicat, 62 Wencui Rd, Shenyang 110016, Peoples R China.
2016-12-15
发表期刊MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
ISSN0921-5093
卷号678页码:329-338
摘要Three dilute Mg-Zn-Ca-Mn alloys were successfully extruded at 24 m/min and the alloy with lowest Zn content (0.21 wt%) can even be extruded at 60 m/min without any surface defects, which was ascribed to the thermally stable Mg2Ca phase and high solidus temperature (similar to 620 degrees C). The alloys extruded at die-exit speed >= 6 m/min showed a fully dynamically recrystallized (DRXed) microstructure and weak rare earth (RE) texture at the position between [2114] and [2112] parallel to the extrusion direction. Besides, fine Mg2Ca and alpha-Mn particles dynamically precipitated during extrusion, acting as effective pinning obstacles against the DRXed grain growth via Zener drag effect. Due to the deformation temperature rise with increasing extrusion speeds, the grain size increased gradually, which can be understood from the relationship between DRXed grain size and Zener-Hollomon parameter. The RE texture contributed to high uniform elongation of similar to 23%, but the increased grain size ( > 30 mu m) deteriorated post-uniform elongation due to the prevalence of {10 (1) over bar1} contraction and {10 (1) over bar1}-{10 (1) over bar2} double twins during post-uniform deformation.
部门归属[jiang, m. g. ; yan, h. ; chen, r. s.] chinese acad sci, inst met res, grp magnesium alloys & their applicat, 62 wencui rd, shenyang 110016, peoples r china ; [jiang, m. g.] univ chinese acad sci, 19 yuquan rd, beijing 100049, peoples r china ; [xu, c. ; nakata, t. ; kamado, s.] nagaoka univ technol, dept mech engn, nagaoka, niigata 9402188, japan
关键词Magnesium Alloy Extrusion Microstructure Texture Mechanical Properties
学科领域Nanoscience & Nanotechnology ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
资助者State Key Program of National Natural Science of China [51531002]; National Natural Science Foundation of China (NSFC) [51601193, 51301173]; National Key Research and Development Program of China [2016YFB0301104]; National Basic Research Program of China (973 Program) [2013CB632202]; JST, Advanced Low Carbon Technology Research and Development Program (ALCA) [12102886]; JSPS [16K18266]
收录类别sci
语种英语
文献类型期刊论文
条目标识符http://ir.imr.ac.cn/handle/321006/76153
专题中国科学院金属研究所
通讯作者Yan, H; Chen, RS (reprint author), Chinese Acad Sci, Inst Met Res, Grp Magnesium Alloys & Their Applicat, 62 Wencui Rd, Shenyang 110016, Peoples R China.
推荐引用方式
GB/T 7714
Jiang, MG,Xu, C,Nakata, T,et al. High-speed extrusion of dilute Mg-Zn-Ca-Mn alloys and its effect on microstructure, texture and mechanical properties[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2016,678:329-338.
APA Jiang, MG.,Xu, C.,Nakata, T.,Yan, H.,Chen, RS.,...&Chen, RS .(2016).High-speed extrusion of dilute Mg-Zn-Ca-Mn alloys and its effect on microstructure, texture and mechanical properties.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,678,329-338.
MLA Jiang, MG,et al."High-speed extrusion of dilute Mg-Zn-Ca-Mn alloys and its effect on microstructure, texture and mechanical properties".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 678(2016):329-338.
条目包含的文件
条目无相关文件。
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[Jiang, MG]的文章
[Xu, C]的文章
[Nakata, T]的文章
百度学术
百度学术中相似的文章
[Jiang, MG]的文章
[Xu, C]的文章
[Nakata, T]的文章
必应学术
必应学术中相似的文章
[Jiang, MG]的文章
[Xu, C]的文章
[Nakata, T]的文章
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。