Copper precipitation behavior and mechanical properties of Cu-bearing 316L austenitic stainless steel: A comprehensive cross-correlation study

IMR OpenIR

	Copper precipitation behavior and mechanical properties of Cu-bearing 316L austenitic stainless steel: A comprehensive cross-correlation study
	Xi, T; Shahzad, MB; Xu, DK; Zhao, JL; Yang, CG; Qi, M; Yang, K; Yang, K (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China.
	2016-10-15
发表期刊	MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
ISSN	0921-5093
卷号	675 页码:243-252
摘要	The effect of precipitation hardening on mechanical properties and coarsening behavior of Cu-rich precipitates in a Cu-bearing 316L austenite stainless steel after aging at 700 degrees C for different time were systematically investigated. The variations of morphology and composition of Cu-rich precipitates as a function of aging time were respectively characterized by electrical resistivity, atom probe tomography (APT) and transmission electron microscopy (TEM). It was found that both hardness and mechanical strength increased to peak value within short aging time, and remained nearly unchanged with prolonged aging time. The TEM observation confirmed a coherent interface between Cu-rich precipitates and austenite matrix, while high number densities of spheroidal Cu-rich precipitates were observed in all aged samples. APT analyses confirmed virtually 100% Cu core composition of Cu-rich precipitates, whereas the average radius was slightly increased from 1.38 +/- 0.46 nm to 2.39 +/- 0.81 nm with increasing the aging time. The relatively slow growth and coarsening behavior of Cu-rich precipitates was largely attributed to the slower diffusion kinetics of Cu, low interfacial energy and high strain energy of Cu-rich precipitates in the austenite matrix, and was well predicted by the Lifshitz-Slyozov-Wagner theory. The slow increase in average radius of Cu-rich precipitates was consistent with the modest change in hardness and yield strength with extended aging. In addition, the precipitation strengthening effects of Cu-rich precipitates were quantitatively evaluated and analyzed. These cumulative results and analyses could provide a solid foundation for much wider applications of Cu-bearing stainless steels. (C) 2016 Elsevier B.V. All rights reserved.
部门归属	[xi, tong ; shahzad, m. babar ; xu, dake ; zhao, jinlong ; yang, chunguang ; yang, ke] chinese acad sci, inst met res, shenyang 110016, peoples r china ; [xi, tong ; qi, min] dalian univ technol, sch mat sci engn, dalian 116024, peoples r china
关键词	Copper Precipitation Atom Probe Tomography Precipitation Hardening Coarsening Austenitic Stainless Steel
学科领域	Nanoscience & Nanotechnology ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
资助者	National Natural Science Foundation of China [51371168, 51501188]; National Natural Science Foundation of China Research Fund for International Young Scientists [51450110439]; National Key Research and Development Program [2016YFB0300205]
收录类别	sci
语种	英语
WOS记录号	WOS:000384383700026
引用统计	被引频次：99[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/76234
专题	中国科学院金属研究所
通讯作者	Yang, CG; Yang, K (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China.
推荐引用方式 GB/T 7714	Xi, T,Shahzad, MB,Xu, DK,et al. Copper precipitation behavior and mechanical properties of Cu-bearing 316L austenitic stainless steel: A comprehensive cross-correlation study[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2016,675:243-252.
APA	Xi, T.,Shahzad, MB.,Xu, DK.,Zhao, JL.,Yang, CG.,...&Yang, K .(2016).Copper precipitation behavior and mechanical properties of Cu-bearing 316L austenitic stainless steel: A comprehensive cross-correlation study.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,675,243-252.
MLA	Xi, T,et al."Copper precipitation behavior and mechanical properties of Cu-bearing 316L austenitic stainless steel: A comprehensive cross-correlation study".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 675(2016):243-252.