IMR OpenIR
Microstructural characteristics and mechanical properties of a Mo modified Ni-Fe-Cr based alloy
Wang, CS; Guo, YG; Guo, JT; Zhou, LZ; Zhou, LZ (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China.
2016-10-15
发表期刊MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
ISSN0921-5093
卷号675页码:314-322
摘要The effects of Mo content on the microstructural characteristics and mechanical properties of a Ni-Fe-Cr based alloy with low gamma prime (gamma') volume fraction, considered as boiler materials in 700 degrees C advanced ultra-supercritical (A-USC) coal-fired power plants, were studied in this paper. Detailed investigations reveal that the alloys with different Mo contents have similar microstructural characteristics, except the gamma-gamma' misfit after standard heat treatment. The major precipitates of the alloys are all spherical gamma', blocky MC and discrete M23C6. During long-term thermal exposure at 700-750 degrees C, the variation of Mo content has no notable influence on primary MC degeneration, precipitation and growth of M23C6 carbide. The coarsening behavior of gamma' phase of the alloys with different Mo contents all follows Ostwald ripening kinetics. The higher Mo content can decrease gamma' coarsening rate due to the increase of the activation energy for gamma' coarsening. After standard heat treatment, the tensile properties of the alloys with different Mo contents are almost same. However, the stress rupture life increases significantly with increasing Mo content, but the ductility has no obvious change. The effects of Mo on the diffusion processes, the stacking fault energy and gamma-gamma' misfit are assumed to cause the increase of the stress rupture life. (C) 2016 Elsevier B.V. All rights reserved.
部门归属[wang, changshuai ; guo, yongan ; guo, jianting ; zhou, lanzhang] chinese acad sci, inst met res, shenyang 110016, peoples r china
关键词Ni-fe-cr Based Alloy Gamma ' Phase Carbides Mechanical Properties Mo
学科领域Nanoscience & Nanotechnology ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
资助者National Natural Science Foundation of China, China [51301171]; National Energy Administration Program of China [NY20150102]; fund of the State Key Laboratory of Solidification Processing in NWPU [SKLSP201512]
收录类别sci
语种英语
文献类型期刊论文
条目标识符http://ir.imr.ac.cn/handle/321006/76235
专题中国科学院金属研究所
通讯作者Wang, CS; Zhou, LZ (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China.
推荐引用方式
GB/T 7714
Wang, CS,Guo, YG,Guo, JT,et al. Microstructural characteristics and mechanical properties of a Mo modified Ni-Fe-Cr based alloy[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2016,675:314-322.
APA Wang, CS,Guo, YG,Guo, JT,Zhou, LZ,&Zhou, LZ .(2016).Microstructural characteristics and mechanical properties of a Mo modified Ni-Fe-Cr based alloy.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,675,314-322.
MLA Wang, CS,et al."Microstructural characteristics and mechanical properties of a Mo modified Ni-Fe-Cr based alloy".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 675(2016):314-322.
条目包含的文件
条目无相关文件。
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[Wang, CS]的文章
[Guo, YG]的文章
[Guo, JT]的文章
百度学术
百度学术中相似的文章
[Wang, CS]的文章
[Guo, YG]的文章
[Guo, JT]的文章
必应学术
必应学术中相似的文章
[Wang, CS]的文章
[Guo, YG]的文章
[Guo, JT]的文章
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。