Microstructural changes and their effect on tensile properties of a Ni-Fe based alloy during long-term thermal exposure

IMR OpenIR

	Microstructural changes and their effect on tensile properties of a Ni-Fe based alloy during long-term thermal exposure
	Wang, CS; Guo, YA; Guo, JT; Zhou, LZ; Zhou, LZ (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China.
	2016-07-18
发表期刊	MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
ISSN	0921-5093
卷号	670 页码:178-187
摘要	Microstructural changes and their effect on tensile properties of a Ni-Fe based alloy, considered as boiler materials in 700 degrees C advanced ultra-supercritical (A-USC) coal-fired power plants, were investigated during exposure at 700-800 degrees C for up to 30000 h. The results show that the major precipitates are still spherical gamma ', blocky MC and discrete particle-like M23C6 after long-term thermal exposure. No eta or sigma and other detrimental phases were observed. The main changes in microstructure are gamma ' coarsening and the precipitation and growth of M23C6 carbide. The coarsening behavior of gamma ' precipitates is in good accordance with the prediction of the Lifshitz-Slozov-Wagner (LSW) theory during exposure at 700 degrees C. However, it deviates from the prediction of LSW theory at 750 and 800 degrees C and an anomalous coarsening behavior of gamma ' precipitates was observed. For M23C6 carbide, the size and amount first increase, and then keep almost constant with increasing exposure time at 700 and 750 degrees C, but the dissolution of M23C6 carbide appears at 800 degrees C. The yield strength first increases and then slightly decreases with increasing exposure time at 700 degrees C, while it decreases gradually at 750 degrees C and decreases drastically and then keeps almost constant at 800 degrees C. However, the yield strength almost keeps the same level as that of the samples after standard heat treatment even if after exposure at 700 degrees C for 30000 h. The elongation has no obvious change with increasing exposure time at 700 and 750 degrees C, but it increases gradually at 800 degrees C. The changes in yield strength and ductility can be attributed to the gamma ' coarsening and the evolution of M23C6 carbide. (C) 2016 Elsevier B.V. All rights reserved.
部门归属	[wang, changshuai ; guo, yongan ; guo, jianting ; zhou, lanzhang] chinese acad sci, inst met res, shenyang 110016, peoples r china
关键词	Ni-fe Based Alloy Gamma ' Precipitates M23c6 Carbide Tensile Properties
学科领域	Nanoscience & Nanotechnology ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
资助者	National High Technology Research and Development Program of China (863 Program) [2012AA03A501]; National Natural Science Foundation of China [51301171]; National Energy Administration Program of China [NY20150102]
收录类别	sci
语种	英语
WOS记录号	WOS:000380078800022
引用统计	被引频次：43[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/76326
专题	中国科学院金属研究所
通讯作者	Zhou, LZ (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China.
推荐引用方式 GB/T 7714	Wang, CS,Guo, YA,Guo, JT,et al. Microstructural changes and their effect on tensile properties of a Ni-Fe based alloy during long-term thermal exposure[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2016,670:178-187.
APA	Wang, CS,Guo, YA,Guo, JT,Zhou, LZ,&Zhou, LZ .(2016).Microstructural changes and their effect on tensile properties of a Ni-Fe based alloy during long-term thermal exposure.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,670,178-187.
MLA	Wang, CS,et al."Microstructural changes and their effect on tensile properties of a Ni-Fe based alloy during long-term thermal exposure".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 670(2016):178-187.