IMR OpenIR
Effects of Cu addition on the microstructure and mechanical properties of as-cast and heat treated Mg-6Zn-4Al magnesium alloy
Zhu, Shaozhen; Luo, Tianjiao; Zhang, Tingan; Li, Yingju; Yang, Yuansheng; Yang, YS (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China.
2017-03-24
发表期刊MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
ISSN0921-5093
卷号689页码:203-211
摘要The microstructure and mechanical properties of as-cast and heat treated Mg-6Zn-4Al-xCu (x=0, 0.5, 1.0 and 1.5 wt%) alloys were investigated in this work. The results show that the grain sizes of the alloys decrease considerably with increasing Cu addition, and the eutectics are refined with 0.5% Cu addition. The icosahedral quasi-crystalline phase is observed in Mg-6Zn-4Al and Cu-containing alloys, and the MgAlCu phase forms in the Cu-containing alloys because of Cu addition. Compared with Mg-6Zn-4Al alloy, the Cu-containing alloys exhibit improved age-hardening response during single-aging treatment. In addition, high-density fine precipitates are formed in the matrix during double-aging treatment, resulting in remarkable improvement of the tensile strength. The double aged Mg-6Zn-4Al-0.5Cu alloy shows the relatively optimal tensile properties. The yield strength, ultimate tensile strength and elongation are 202 MPa, 312 MPa and 7%, respectively, which is attributed to the combined effects of fine grains and the uniform distribution of high-density fine precipitates. It is noticed that the ductility of as-aged Cu-containing alloys is lower than that of the as-aged Mg-6Zn-4Al alloy due to the stress concentration during the tensile stress caused by the residual phases distributed along the grain boundaries after solution treatment.; The microstructure and mechanical properties of as-cast and heat treated Mg-6Zn-4Al-xCu (x=0, 0.5, 1.0 and 1.5 wt%) alloys were investigated in this work. The results show that the grain sizes of the alloys decrease considerably with increasing Cu addition, and the eutectics are refined with 0.5% Cu addition. The icosahedral quasi-crystalline phase is observed in Mg-6Zn-4Al and Cu-containing alloys, and the MgAlCu phase forms in the Cu-containing alloys because of Cu addition. Compared with Mg-6Zn-4Al alloy, the Cu-containing alloys exhibit improved age-hardening response during single-aging treatment. In addition, high-density fine precipitates are formed in the matrix during double-aging treatment, resulting in remarkable improvement of the tensile strength. The double aged Mg-6Zn-4Al-0.5Cu alloy shows the relatively optimal tensile properties. The yield strength, ultimate tensile strength and elongation are 202 MPa, 312 MPa and 7%, respectively, which is attributed to the combined effects of fine grains and the uniform distribution of high-density fine precipitates. It is noticed that the ductility of as-aged Cu-containing alloys is lower than that of the as-aged Mg-6Zn-4Al alloy due to the stress concentration during the tensile stress caused by the residual phases distributed along the grain boundaries after solution treatment.
部门归属[zhu, shaozhen] northeastrn univ, sch mat sci & engn, shenyang 110819, peoples r china ; [zhu, shaozhen ; luo, tianjiao ; li, yingju ; yang, yuansheng] chinese acad sci, inst met res, shenyang 110016, peoples r china ; [zhang, tingan] northeastern univ, sch met, shenyang 110819, peoples r china ; [li, yingju ; yang, yuansheng] shandong key lab high strength lightweight metall, jinan 250014, peoples r china
关键词Magnesium Alloy Mg-zn-al Cu Addition Heat Treatment Mechanical Properties
学科领域Nanoscience & Nanotechnology ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
资助者National Basic Research Program of China [2013CB632205]; National Key Research and Development Program of China [2016YFB0301105]; National Natural Science Foundation of China [51274184]
收录类别SCI
语种英语
文献类型期刊论文
条目标识符http://ir.imr.ac.cn/handle/321006/78220
专题中国科学院金属研究所
通讯作者Yang, YS (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China.
推荐引用方式
GB/T 7714
Zhu, Shaozhen,Luo, Tianjiao,Zhang, Tingan,et al. Effects of Cu addition on the microstructure and mechanical properties of as-cast and heat treated Mg-6Zn-4Al magnesium alloy[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2017,689:203-211.
APA Zhu, Shaozhen,Luo, Tianjiao,Zhang, Tingan,Li, Yingju,Yang, Yuansheng,&Yang, YS .(2017).Effects of Cu addition on the microstructure and mechanical properties of as-cast and heat treated Mg-6Zn-4Al magnesium alloy.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,689,203-211.
MLA Zhu, Shaozhen,et al."Effects of Cu addition on the microstructure and mechanical properties of as-cast and heat treated Mg-6Zn-4Al magnesium alloy".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 689(2017):203-211.
条目包含的文件
条目无相关文件。
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[Zhu, Shaozhen]的文章
[Luo, Tianjiao]的文章
[Zhang, Tingan]的文章
百度学术
百度学术中相似的文章
[Zhu, Shaozhen]的文章
[Luo, Tianjiao]的文章
[Zhang, Tingan]的文章
必应学术
必应学术中相似的文章
[Zhu, Shaozhen]的文章
[Luo, Tianjiao]的文章
[Zhang, Tingan]的文章
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。