Effect of beta (110) texture intensity on alpha-variant selection and microstructure morphology during beta -> alpha phase transformation in near alpha titanium alloy

IMR OpenIR

	Effect of beta (110) texture intensity on alpha-variant selection and microstructure morphology during beta -> alpha phase transformation in near alpha titanium alloy
	Zhao, Z. B.; Wang, Q. J.; Hu, Q. M.; Liu, J. R.; Yu, B. B.; Yang, R.; Wang, QJ (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China.
	2017-03-01
发表期刊	ACTA MATERIALIA
ISSN	1359-6454
卷号	126 页码:372-382
摘要	In the present work, we investigated the texture evolution as well as the role of the 3 texture intensity on the alpha-variant selection and microstructure morphology during the alpha ->beta ->alpha phase transformation in Ti60 alloy. Different microstructures and textures were obtained through forging the Ti60 bars into diameters of 45 mm denoted as D45 and 30 mm as D30. Subsequently, small samples with the same size cut from both bars were heat-treated above the beta transus followed by furnace cooling and air cooling. We found that the beta texture intensity, cooling rate, and variant selection affect both the texture intensity and microstructure morphology of the transformed alpha phase. The high temperature beta phase exhibits stronger (110) parallel to axial direction fiber texture in the beta annealed D30 bar than that for the D45 bar. A basketweave microstructure was found in the beta annealed D45 bar after air cooling whereas a coarse a colonies populated by fine alpha lamellae formed in the D30 bar. For furnace cooled samples, the a texture is stronger than that in the air cooled sample in D45 bar whereas the intensities of the textures are very similar to air cooled sample in the D30 bar. The influence of the (beta texture intensity and variant selection on the alpha texture evolution were studied by comparing the four experimental results and simulation data. The effect of alpha variant number in a beta grain on alpha texture intensity, base on variant selection, and the effects of beta texture intensity on microstructure morphology are discussed. (C) 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.; In the present work, we investigated the texture evolution as well as the role of the 3 texture intensity on the alpha-variant selection and microstructure morphology during the alpha ->beta ->alpha phase transformation in Ti60 alloy. Different microstructures and textures were obtained through forging the Ti60 bars into diameters of 45 mm denoted as D45 and 30 mm as D30. Subsequently, small samples with the same size cut from both bars were heat-treated above the beta transus followed by furnace cooling and air cooling. We found that the beta texture intensity, cooling rate, and variant selection affect both the texture intensity and microstructure morphology of the transformed alpha phase. The high temperature beta phase exhibits stronger (110) parallel to axial direction fiber texture in the beta annealed D30 bar than that for the D45 bar. A basketweave microstructure was found in the beta annealed D45 bar after air cooling whereas a coarse a colonies populated by fine alpha lamellae formed in the D30 bar. For furnace cooled samples, the a texture is stronger than that in the air cooled sample in D45 bar whereas the intensities of the textures are very similar to air cooled sample in the D30 bar. The influence of the (beta texture intensity and variant selection on the alpha texture evolution were studied by comparing the four experimental results and simulation data. The effect of alpha variant number in a beta grain on alpha texture intensity, base on variant selection, and the effects of beta texture intensity on microstructure morphology are discussed. (C) 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
部门归属	[zhao, z. b. ; wang, q. j. ; hu, q. m. ; liu, j. r. ; yu, b. b. ; yang, r.] chinese acad sci, inst met res, shenyang 110016, peoples r china
关键词	Titanium Alloy Variant Selection Microstructure Morphology Ebsd Texture
学科领域	Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
收录类别	SCI
语种	英语
WOS记录号	WOS:000394918500035
引用统计	被引频次：135[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/78249
专题	中国科学院金属研究所
通讯作者	Wang, QJ (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China.
推荐引用方式 GB/T 7714	Zhao, Z. B.,Wang, Q. J.,Hu, Q. M.,et al. Effect of beta (110) texture intensity on alpha-variant selection and microstructure morphology during beta -> alpha phase transformation in near alpha titanium alloy[J]. ACTA MATERIALIA,2017,126:372-382.
APA	Zhao, Z. B..,Wang, Q. J..,Hu, Q. M..,Liu, J. R..,Yu, B. B..,...&Wang, QJ .(2017).Effect of beta (110) texture intensity on alpha-variant selection and microstructure morphology during beta -> alpha phase transformation in near alpha titanium alloy.ACTA MATERIALIA,126,372-382.
MLA	Zhao, Z. B.,et al."Effect of beta (110) texture intensity on alpha-variant selection and microstructure morphology during beta -> alpha phase transformation in near alpha titanium alloy".ACTA MATERIALIA 126(2017):372-382.