IMR OpenIR
Flow behavior and processing map for hot deformation of ATI425 titanium alloy
Meng, QG; Bai, CG; Xu, DS; Bai, CG (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China.
2018-04-01
发表期刊JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
ISSN1005-0302
卷号34期号:4页码:679-688
摘要Flow behavior and processing map play important roles in the hot deformation process of titanium alloys. In this research, compression Gleeble tests have been carried out to investigate the stress-strain relationship at temperatures ranging from 700 to 1000 degrees C and strain rates ranging from 0.001 to 1 s(-1) for ATI 425 titanium alloy. Arrhenius type constitutive equation was obtained to describe the compressive flow behavior with modification of additional deformation dead zone, friction model, temperature model and strain rate. The introduction of novel calculation method for alpha value in Arrhenius equation gives more accurate fitting than traditional one. Processing maps were drawn based on the distribution of dissipator co-content, and optimized deformation temperature and strain rate range obtained. It is proven to be accurate and effective through the experimental results. The microstructure analysis shows that more dynamic recrystallization can be achieved in the area with larger eta value on the processing map. (C) 2017 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.; Flow behavior and processing map play important roles in the hot deformation process of titanium alloys. In this research, compression Gleeble tests have been carried out to investigate the stress-strain relationship at temperatures ranging from 700 to 1000 degrees C and strain rates ranging from 0.001 to 1 s(-1) for ATI 425 titanium alloy. Arrhenius type constitutive equation was obtained to describe the compressive flow behavior with modification of additional deformation dead zone, friction model, temperature model and strain rate. The introduction of novel calculation method for alpha value in Arrhenius equation gives more accurate fitting than traditional one. Processing maps were drawn based on the distribution of dissipator co-content, and optimized deformation temperature and strain rate range obtained. It is proven to be accurate and effective through the experimental results. The microstructure analysis shows that more dynamic recrystallization can be achieved in the area with larger eta value on the processing map. (C) 2017 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.
部门归属[meng, qinggang ; bai, chunguang ; xu, dongsheng] chinese acad sci, inst met res, shenyang 110016, liaoning, peoples r china
关键词Constitutive Equation Instability Criteria Elevated-temperature Zr Alloy Microstructure Working
学科领域Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
收录类别SCI
语种英语
文献类型期刊论文
条目标识符http://ir.imr.ac.cn/handle/321006/79400
专题中国科学院金属研究所
通讯作者Bai, CG (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China.
推荐引用方式
GB/T 7714
Meng, QG,Bai, CG,Xu, DS,et al. Flow behavior and processing map for hot deformation of ATI425 titanium alloy[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,2018,34(4):679-688.
APA Meng, QG,Bai, CG,Xu, DS,&Bai, CG .(2018).Flow behavior and processing map for hot deformation of ATI425 titanium alloy.JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,34(4),679-688.
MLA Meng, QG,et al."Flow behavior and processing map for hot deformation of ATI425 titanium alloy".JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 34.4(2018):679-688.
条目包含的文件
条目无相关文件。
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[Meng, QG]的文章
[Bai, CG]的文章
[Xu, DS]的文章
百度学术
百度学术中相似的文章
[Meng, QG]的文章
[Bai, CG]的文章
[Xu, DS]的文章
必应学术
必应学术中相似的文章
[Meng, QG]的文章
[Bai, CG]的文章
[Xu, DS]的文章
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。