Exploring the fatigue strength improvement of Cu-Al alloys

IMR OpenIR

	Exploring the fatigue strength improvement of Cu-Al alloys
	Liu, R; Tian, YZ; Zhang, ZJ; Zhang, P; An, XH; Zhang, ZF; Zhang, ZF (reprint author), Chinese Acad Sci, Shenyang Natl Lab Mat Sci, Inst Met Res, 72 Wenhua Rd, Shenyang 110016, Liaoning, Peoples R China.
	2018-02-01
发表期刊	ACTA MATERIALIA
ISSN	1359-6454
卷号	144 页码:613-626
摘要	As a significant scientific problem directly impacting on the long-term safety of engineering materials and facilities, the improvement of fatigue strength under fully-reversed cycling was comprehensively explored in this study. Advantageous material characteristics for the improvement of fatigue strength were summarized from the achievements of the previous researches, followed by a new attempt to combine them in material design. As the model material, alpha-Cu-Al alloys with clean ultrafine-grains as well as large proportions of twin boundaries were thus produced, which exhibited a notable fatigue strength improvement (up to 155% higher than the coarse-grained counterparts and 40% higher than the counterparts produced by severe plastic deformation). Furthermore, a general principle briefly summarized as localized fatigue damage reduction was proposed based on the analysis of the optimizing methods including microstructure optimization and composition optimization. Accordingly, several recommended features to obtain such high fatigue strength materials were finally listed for further anti fatigue design, such as uniform grains with small size and stable boundaries; low initial dislocation density, and proper alloying composition. Published by Elsevier Ltd on behalf of Acta Materialia Inc.; As a significant scientific problem directly impacting on the long-term safety of engineering materials and facilities, the improvement of fatigue strength under fully-reversed cycling was comprehensively explored in this study. Advantageous material characteristics for the improvement of fatigue strength were summarized from the achievements of the previous researches, followed by a new attempt to combine them in material design. As the model material, alpha-Cu-Al alloys with clean ultrafine-grains as well as large proportions of twin boundaries were thus produced, which exhibited a notable fatigue strength improvement (up to 155% higher than the coarse-grained counterparts and 40% higher than the counterparts produced by severe plastic deformation). Furthermore, a general principle briefly summarized as localized fatigue damage reduction was proposed based on the analysis of the optimizing methods including microstructure optimization and composition optimization. Accordingly, several recommended features to obtain such high fatigue strength materials were finally listed for further anti fatigue design, such as uniform grains with small size and stable boundaries; low initial dislocation density, and proper alloying composition. Published by Elsevier Ltd on behalf of Acta Materialia Inc.
部门归属	[liu, r. ; tian, y. z. ; zhang, z. j. ; zhang, p. ; an, x. h. ; zhang, z. f.] chinese acad sci, shenyang natl lab mat sci, inst met res, 72 wenhua rd, shenyang 110016, liaoning, peoples r china ; [liu, r.] univ chinese acad sci, 19 yuquan rd, beijing 100049, peoples r china ; [an, x. h.] univ sydney, sch aerosp mech & mechatron engn, sydney, nsw 2006, australia
关键词	Severe Plastic-deformation Stacking-fault Energy Ultrafine-grained Copper High-pressure Torsion Cyclic Deformation Microstructural Evolution Nanocrystalline Metals Optimizing Strength Ductility Behavior
学科领域	Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
资助者	National Natural Science Foundation of China (NSFC) [51201165, 51331007, 51501198]
收录类别	SCI
语种	英语
WOS记录号	WOS:000424067100056
引用统计	被引频次：75[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/79550
专题	中国科学院金属研究所
通讯作者	Tian, YZ; Zhang, ZF (reprint author), Chinese Acad Sci, Shenyang Natl Lab Mat Sci, Inst Met Res, 72 Wenhua Rd, Shenyang 110016, Liaoning, Peoples R China.
推荐引用方式 GB/T 7714	Liu, R,Tian, YZ,Zhang, ZJ,et al. Exploring the fatigue strength improvement of Cu-Al alloys[J]. ACTA MATERIALIA,2018,144:613-626.
APA	Liu, R.,Tian, YZ.,Zhang, ZJ.,Zhang, P.,An, XH.,...&Zhang, ZF .(2018).Exploring the fatigue strength improvement of Cu-Al alloys.ACTA MATERIALIA,144,613-626.
MLA	Liu, R,et al."Exploring the fatigue strength improvement of Cu-Al alloys".ACTA MATERIALIA 144(2018):613-626.