Effect of carbon on the microstructure and stress rupture properties of a new Ni-Cr-W-Fe alloy for advanced ultra-supercritical power plants

IMR OpenIR

	Effect of carbon on the microstructure and stress rupture properties of a new Ni-Cr-W-Fe alloy for advanced ultra-supercritical power plants
	Ou, MQ; Hao, XC; Ma, YC; Liu, RC; Zhang, L; Liu, K; Ma, YC (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China.
	2018-01-25
发表期刊	JOURNAL OF ALLOYS AND COMPOUNDS
ISSN	0925-8388
卷号	732 页码:107-115
摘要	This paper studied the effect of carbon on the microstructure and stress rupture properties of a new Ni-Cr-W-Fe alloy. With carbon content increasing from 0.008 wt% to 0.073 wt%, the volume fraction and average size of MC and M23C6 carbides increased significantly. The morphology of MC remained dispersed blocky shape while the morphology of M23C6 changed from continuous thin strip to granular. But no obvious variations were observed in the quantity, size and morphology of gamma ' phase. During heat treatment, the hot-rolled grains grew up quickly and the grain growth rate of 0.008% C alloy was almost three times higher than that of 0.073% C alloy. The reason was that the MC carbides effectively inhibited the grain growth. After stress rupture test at 750 degrees C/300 MPa and 750 degrees C/400 MPa, the stress rupture life was in parabolic curve relationship with carbon content, 0.034 wt% and 0.045 wt% C alloys had higher stress rupture lives than other alloys. With the increase of carbon content, the ductility increased firstly and then reached relatively stable status, the fracture mode gradually varied from intergranular fracture to intergranular dimple mixed fracture. The change of stress rupture properties with carbon content was closely related to carbides and the grain size, which would be analyzed in this paper. (c) 2017 Elsevier B.V. All rights reserved.; This paper studied the effect of carbon on the microstructure and stress rupture properties of a new Ni-Cr-W-Fe alloy. With carbon content increasing from 0.008 wt% to 0.073 wt%, the volume fraction and average size of MC and M23C6 carbides increased significantly. The morphology of MC remained dispersed blocky shape while the morphology of M23C6 changed from continuous thin strip to granular. But no obvious variations were observed in the quantity, size and morphology of gamma ' phase. During heat treatment, the hot-rolled grains grew up quickly and the grain growth rate of 0.008% C alloy was almost three times higher than that of 0.073% C alloy. The reason was that the MC carbides effectively inhibited the grain growth. After stress rupture test at 750 degrees C/300 MPa and 750 degrees C/400 MPa, the stress rupture life was in parabolic curve relationship with carbon content, 0.034 wt% and 0.045 wt% C alloys had higher stress rupture lives than other alloys. With the increase of carbon content, the ductility increased firstly and then reached relatively stable status, the fracture mode gradually varied from intergranular fracture to intergranular dimple mixed fracture. The change of stress rupture properties with carbon content was closely related to carbides and the grain size, which would be analyzed in this paper. (c) 2017 Elsevier B.V. All rights reserved.
部门归属	[ou, meiqiong ; hao, xianchao ; ma, yingche ; liu, ruichang ; zhang, long ; liu, kui] chinese acad sci, inst met res, shenyang 110016, liaoning, peoples r china ; [ou, meiqiong] univ sci & technol china, sch mat sci & engn, hefei 230026, anhui, peoples r china
关键词	Grain-boundary Serration Nickel-based Superalloy Base Superalloy Inconel Alloy-740 Creep-properties Carbides Deformation Evolution Behavior Precipitation
学科领域	Chemistry, Physical ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
收录类别	SCI
语种	英语
WOS记录号	WOS:000415931900013
引用统计	被引频次：31[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/79566
专题	中国科学院金属研究所
通讯作者	Ma, YC (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China.
推荐引用方式 GB/T 7714	Ou, MQ,Hao, XC,Ma, YC,et al. Effect of carbon on the microstructure and stress rupture properties of a new Ni-Cr-W-Fe alloy for advanced ultra-supercritical power plants[J]. JOURNAL OF ALLOYS AND COMPOUNDS,2018,732:107-115.
APA	Ou, MQ.,Hao, XC.,Ma, YC.,Liu, RC.,Zhang, L.,...&Ma, YC .(2018).Effect of carbon on the microstructure and stress rupture properties of a new Ni-Cr-W-Fe alloy for advanced ultra-supercritical power plants.JOURNAL OF ALLOYS AND COMPOUNDS,732,107-115.
MLA	Ou, MQ,et al."Effect of carbon on the microstructure and stress rupture properties of a new Ni-Cr-W-Fe alloy for advanced ultra-supercritical power plants".JOURNAL OF ALLOYS AND COMPOUNDS 732(2018):107-115.