IMR OpenIR
Strain rate-induced plasticity in bcc beta-Ti alloy single crystal micropillars containing brittle omega-precipitates
Chen, W; Huang, ZW; Cao, S; Pan, Y; Huang, MD; Hu, QM; Xu, D; Sun, QY; Xiao, L; Sun, J; Huang, ZW (reprint author), Cent S Univ, State Key Lab Power Met, Changsha 410033, Hunan, Peoples R China.; Hu, QM (reprint author), Chinese Acad Sci, Shenyang Natl Lab Mat Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China.
2018-01-05
Source PublicationMATERIALS & DESIGN
ISSN0264-1275
Volume137Pages:404-413
AbstractBrittle omega-precipitates in bcc beta-Ti alloys are well known to dramatically degrade material plasticity and even trigger macroscopic premature fracture, posing an obstacle for structural applications. The embrittlementmechanism is intimately related to dislocation pile-up at the omega/beta interface that leads to stress concentration and undesirable failure. The underlying physics of improving ductility remains to be further uncovered. Herewe report a new finding in beta-Ti alloy single crystal micropillar compression that the plasticity can be substantially improved bymeans of increasing strain rate, while mechanical strength simultaneously exhibits striking "faster is stronger" fashion. The results reveal that the improvement of micropillar plasticity upon higher loading rate can be ascribed to the wider deformation band, in contrast to equivalents under quasi-static mode. The microscopic examination shows that cross slip induced by screw dislocations governs the plasticity improvement, which is further validated by crystallographic analysis and first principle energy landscape calculations. This "dynamic self-toughening" behavior advances our fundamental understanding to the plastic deformation mechanism of omega-precipitate contained bcc beta-Ti alloys. (C) 2017 Elsevier Ltd. All rights reserved.; Brittle omega-precipitates in bcc beta-Ti alloys are well known to dramatically degrade material plasticity and even trigger macroscopic premature fracture, posing an obstacle for structural applications. The embrittlementmechanism is intimately related to dislocation pile-up at the omega/beta interface that leads to stress concentration and undesirable failure. The underlying physics of improving ductility remains to be further uncovered. Herewe report a new finding in beta-Ti alloy single crystal micropillar compression that the plasticity can be substantially improved bymeans of increasing strain rate, while mechanical strength simultaneously exhibits striking "faster is stronger" fashion. The results reveal that the improvement of micropillar plasticity upon higher loading rate can be ascribed to the wider deformation band, in contrast to equivalents under quasi-static mode. The microscopic examination shows that cross slip induced by screw dislocations governs the plasticity improvement, which is further validated by crystallographic analysis and first principle energy landscape calculations. This "dynamic self-toughening" behavior advances our fundamental understanding to the plastic deformation mechanism of omega-precipitate contained bcc beta-Ti alloys. (C) 2017 Elsevier Ltd. All rights reserved.
description.department[chen, wei ; pan, yan ; huang, mingda ; xu, ding ; sun, qiaoyan ; xiao, lin ; sun, jun] xi an jiao tong univ, state key lab mech behav mat, xian 710049, shaanxi, peoples r china ; [huang, zaiwang] cent s univ, state key lab power met, changsha 410033, hunan, peoples r china ; [cao, shuo ; hu, qingmiao] chinese acad sci, shenyang natl lab mat sci, inst met res, shenyang 110016, liaoning, peoples r china
KeywordTotal-energy Calculations Wave Basis-set Rate Sensitivity Titanium-alloy Biomedical Applications Phase-transformations Mechanical-properties Tensile Deformation Grain-size Strength
Subject AreaMaterials Science, Multidisciplinary
Funding OrganizationNational Natural Science Foundation of China [51301127, 51321003, 51402363]; 973 Program of China [2014CB644002, 2014CB644003]; 111 Project of China [B06025]; Natural Science Basic Research Plan in Shaanxi Province of China [2014JQ6205]; Fundamental Research Funds for Central Universities of China [xjj2014126]
Indexed BySCI
Language英语
Document Type期刊论文
Identifierhttp://ir.imr.ac.cn/handle/321006/79592
Collection中国科学院金属研究所
Corresponding AuthorHuang, ZW (reprint author), Cent S Univ, State Key Lab Power Met, Changsha 410033, Hunan, Peoples R China.; Hu, QM (reprint author), Chinese Acad Sci, Shenyang Natl Lab Mat Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China.
Recommended Citation
GB/T 7714
Chen, W,Huang, ZW,Cao, S,et al. Strain rate-induced plasticity in bcc beta-Ti alloy single crystal micropillars containing brittle omega-precipitates[J]. MATERIALS & DESIGN,2018,137:404-413.
APA Chen, W.,Huang, ZW.,Cao, S.,Pan, Y.,Huang, MD.,...&Hu, QM .(2018).Strain rate-induced plasticity in bcc beta-Ti alloy single crystal micropillars containing brittle omega-precipitates.MATERIALS & DESIGN,137,404-413.
MLA Chen, W,et al."Strain rate-induced plasticity in bcc beta-Ti alloy single crystal micropillars containing brittle omega-precipitates".MATERIALS & DESIGN 137(2018):404-413.
Files in This Item:
There are no files associated with this item.
Related Services
Recommend this item
Bookmark
Usage statistics
Export to Endnote
Google Scholar
Similar articles in Google Scholar
[Chen, W]'s Articles
[Huang, ZW]'s Articles
[Cao, S]'s Articles
Baidu academic
Similar articles in Baidu academic
[Chen, W]'s Articles
[Huang, ZW]'s Articles
[Cao, S]'s Articles
Bing Scholar
Similar articles in Bing Scholar
[Chen, W]'s Articles
[Huang, ZW]'s Articles
[Cao, S]'s Articles
Terms of Use
No data!
Social Bookmark/Share
All comments (0)
No comment.
 

Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.