IMR OpenIR
Microstructure evolution and mechanical properties in 718H pre-hardened mold steel during tempering
Liu, HH; Fu, PX; Liu, HW; Sun, C; Ma, XP; Li, DZ; Fu, PX (reprint author), Chinese Acad Sci, Inst Met Res, Beijing, Peoples R China.
2018-01-02
发表期刊MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
ISSN0921-5093
卷号709页码:181-192
摘要The effects of tempering temperature on the microstructure and mechanical properties of 718H pre-hardened mold steel were investigated. After normalizing and quenching treatments, seven specimens were tempered at a temperature in the range of 500-650 degrees C for two hours. After heat treatments, the tempered microstructures were characterized by X-ray diffraction, scanning electron microscopy (SEM), and transmission electron microscopy. In addition, the phase identification and microchemistry of tempered carbides were performed by the physicochemical phase analysis method; then the precipitation sequence of tempered carbides was examined in detail by transmission electron microscopy and selected area electron diffraction patterns. Results indicate that the yield strength, ultimate tensile strength, and the hardness decrease; in contrast, impact energy increases with the increase in tempering temperature. The influence of tempering temperature on mechanical properties of 718H steel is attributed to the precipitation of tempered carbides, the recovery of the martensite lath, the dislocation density, and the grain structure. Furthermore, a more accurate study of the micromechanics was performed through the fatigue crack growth test. And a correlation between microstructure and mechanical properties was established by electron back-scattered diffraction. Finally, the fracture surface of the impact specimen was analyzed by SEM and energy-dispersive X-ray spectroscopy. According to the change in microstructure and mechanical properties as a function of tempering temperature, the optimal tempering temperature has been determined in the range of 530-560 degrees C.; The effects of tempering temperature on the microstructure and mechanical properties of 718H pre-hardened mold steel were investigated. After normalizing and quenching treatments, seven specimens were tempered at a temperature in the range of 500-650 degrees C for two hours. After heat treatments, the tempered microstructures were characterized by X-ray diffraction, scanning electron microscopy (SEM), and transmission electron microscopy. In addition, the phase identification and microchemistry of tempered carbides were performed by the physicochemical phase analysis method; then the precipitation sequence of tempered carbides was examined in detail by transmission electron microscopy and selected area electron diffraction patterns. Results indicate that the yield strength, ultimate tensile strength, and the hardness decrease; in contrast, impact energy increases with the increase in tempering temperature. The influence of tempering temperature on mechanical properties of 718H steel is attributed to the precipitation of tempered carbides, the recovery of the martensite lath, the dislocation density, and the grain structure. Furthermore, a more accurate study of the micromechanics was performed through the fatigue crack growth test. And a correlation between microstructure and mechanical properties was established by electron back-scattered diffraction. Finally, the fracture surface of the impact specimen was analyzed by SEM and energy-dispersive X-ray spectroscopy. According to the change in microstructure and mechanical properties as a function of tempering temperature, the optimal tempering temperature has been determined in the range of 530-560 degrees C.
部门归属[liu, hanghang ; fu, paixian ; liu, hongwei ; sun, chen ; ma, xiaoping ; li, dianzhong] chinese acad sci, inst met res, beijing, peoples r china ; [liu, hanghang ; fu, paixian ; liu, hongwei ; sun, chen ; ma, xiaoping ; li, dianzhong] univ sci & technol china, sch mat sci & engn, 72 wenhua rd, shenyang 110016, liaoning, peoples r china
关键词Heat-resistant Steel Carbide Precipitation Cr-w Retained Austenite Temperature Alloy Strength Fatigue Toughness Behavior
学科领域Nanoscience & Nanotechnology ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
资助者National Key Research and Development Program of China [2016YFB0300401]; Cooperation Program of Hubei Province and Chinese Academy of Sciences (The Research and Development of Key Technologies for Special Steel of Homogeneous High Performance)
收录类别SCI
语种英语
文献类型期刊论文
条目标识符http://ir.imr.ac.cn/handle/321006/79593
专题中国科学院金属研究所
通讯作者Fu, PX (reprint author), Chinese Acad Sci, Inst Met Res, Beijing, Peoples R China.
推荐引用方式
GB/T 7714
Liu, HH,Fu, PX,Liu, HW,et al. Microstructure evolution and mechanical properties in 718H pre-hardened mold steel during tempering[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2018,709:181-192.
APA Liu, HH.,Fu, PX.,Liu, HW.,Sun, C.,Ma, XP.,...&Fu, PX .(2018).Microstructure evolution and mechanical properties in 718H pre-hardened mold steel during tempering.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,709,181-192.
MLA Liu, HH,et al."Microstructure evolution and mechanical properties in 718H pre-hardened mold steel during tempering".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 709(2018):181-192.
条目包含的文件
条目无相关文件。
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[Liu, HH]的文章
[Fu, PX]的文章
[Liu, HW]的文章
百度学术
百度学术中相似的文章
[Liu, HH]的文章
[Fu, PX]的文章
[Liu, HW]的文章
必应学术
必应学术中相似的文章
[Liu, HH]的文章
[Fu, PX]的文章
[Liu, HW]的文章
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。