Knowledge Management System Of Institute of metal research,CAS
冷轧预变形量对1460合金时效析出机制及性能的影响 | |
马娟; 闫德胜; 戎利建; 李依依 | |
2019-02-15 | |
Source Publication | 稀有金属材料与工程
![]() |
Volume | 48Issue:02Pages:594-600 |
Abstract | 研究了时效前不同冷轧预变形量(ε=7%,14%,20%,27%)对1460合金沉淀强化过程的影响。当冷轧变形量增加至20%时,合金中出现位错墙(dense dislocation wall)。位错为T1相提供了形核位置,使得合金中T1相的数量增加,同时尺寸保持在100 nm左右,缩短了峰值时效时间。27%冷轧变形+160℃/20 h时效能提高合金的强度,同时塑性较好,此时合金的抗拉强度和延伸率分别为590 MPa和8%。 |
Keyword | 铝锂合金 预变形 沉淀强化 力学性能 |
MOST Discipline Catalogue | TG146.21 ; TG339 |
Language | 中文 |
WOS Subject | TG146.21 ; TG339 |
Document Type | 期刊论文 |
Identifier | http://ir.imr.ac.cn/handle/321006/80439 |
Collection | 中国科学院金属研究所 |
Affiliation | 1.中国科学院金属研究所 2.成都大学 |
Recommended Citation GB/T 7714 | 马娟,闫德胜,戎利建,等. 冷轧预变形量对1460合金时效析出机制及性能的影响[J]. 稀有金属材料与工程,2019,48(02):594-600. |
APA | 马娟,闫德胜,戎利建,&李依依.(2019).冷轧预变形量对1460合金时效析出机制及性能的影响.稀有金属材料与工程,48(02),594-600. |
MLA | 马娟,et al."冷轧预变形量对1460合金时效析出机制及性能的影响".稀有金属材料与工程 48.02(2019):594-600. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment