Effect of heat treatment on the microstructure and tensile properties of the cast nickel-base superalloy M963 | |
Yin, FS; Sun, XF; Hou, GC; Qi, Z; Guan, HR; Hu, ZQ | |
Corresponding Author | Yin, FS() |
2004 | |
Source Publication | RARE METAL MATERIALS AND ENGINEERING
![]() |
ISSN | 1002-185X |
Volume | 33Issue:1Pages:23-26 |
Abstract | The effects of heat treatment on the microstructural and tensile properties of conventionally cast M963 superalloy both at ambient temperature and 900 degreesC have been investigated. The results show that the solution treatment at 1 210 degreesC for 4h followed by air cooling causes an increase in the tensile strength but a decrease in ductility especially at high temperatures; After the solution treatment, aging at 850 degreesC for 16h followed by furnace cooling further increases the tensile strength and the ductility at high temperature but decreases the ambient temperature ductility. Scanning electron microscope (SEM) observation reveals that the primary MC carbide becomes different and secondary M6C carbide precipitates at grain boundaries and interdendritic regions during the solution treatment at 1 2 10 degreesC for 4h. Fine gamma phase particles precipitate from the gamma solid solution during air-cooling following the solution treatment. The aging treatment at 850 degreesC for 16h makes a fine gamma phase precipitate and grow. Analysis of the fracture surface indicates that the fracture mechanism varies with heat treatment condition. The effects of heat treatment on the tensile properties at both ambient and high temperatures is discussed in terms of interaction between dislocations and particles. |
Keyword | cast nickel-base superalloy heat treatment microstructure ductility |
Indexed By | SCI |
Language | 英语 |
WOS Research Area | Materials Science ; Metallurgy & Metallurgical Engineering |
WOS Subject | Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
WOS ID | WOS:000188932200006 |
Publisher | NORTHWEST INST NONFERROUS METAL RESEARCH |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.imr.ac.cn/handle/321006/80862 |
Collection | 中国科学院金属研究所 |
Corresponding Author | Yin, FS |
Affiliation | 1.Chinese Acad Sci, Met Res Inst, Shenyang 110016, Peoples R China 2.Shandong Univ Technol, Zibo 255012, Peoples R China |
Recommended Citation GB/T 7714 | Yin, FS,Sun, XF,Hou, GC,et al. Effect of heat treatment on the microstructure and tensile properties of the cast nickel-base superalloy M963[J]. RARE METAL MATERIALS AND ENGINEERING,2004,33(1):23-26. |
APA | Yin, FS,Sun, XF,Hou, GC,Qi, Z,Guan, HR,&Hu, ZQ.(2004).Effect of heat treatment on the microstructure and tensile properties of the cast nickel-base superalloy M963.RARE METAL MATERIALS AND ENGINEERING,33(1),23-26. |
MLA | Yin, FS,et al."Effect of heat treatment on the microstructure and tensile properties of the cast nickel-base superalloy M963".RARE METAL MATERIALS AND ENGINEERING 33.1(2004):23-26. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment