Knowledge Management System Of Institute of metal research，CAS
| Incremental forming characteristics of hollow parts with grooves | |
| Guo, Xunzhong; Wang, Cheng; Xu, Yong; Abd El-Aty, Ali; Zhang, Shi-Hong | |
| 2019-05-01 | |
| Source Publication | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
 |
| ISSN | 0268-3768 |
| Volume | 102Issue:2020-01-04Pages:829-837 |
| Abstract | Incremental profile forming (IPF) is a new plastic processing technology developed in recent years. The new profile manufacturing technology is mainly used to produce tubular parts with variable cross sections along the axis of tube. The parts with different cross sections produced by this technology satisfy the lightweight and high strength requirements of the tubular parts. The IPF method is very flexible and can form diverse complex-shaped parts. Because no special machine is available for this technology, depending on the shapes of formed tubular parts, the forming tool and forming method should be designed. Thus, this study proposes a new method to form the annular groove and tube wall groove. Using a special tool and servo drive system of spinning machine, it is possible to form an annular groove and tube wall groove on the surface of tubular part. This is a typical IPF method for tubes. The process of different grooves on the surface of tubes was systematically studied in this paper. Through experiments and finite element simulations, different process parameters influencing the forming quality of groove were studied. It was concluded that the tool's single feed and spindle speed significantly affect the forming quality and forming limit. |
| Keyword | Incremental forming Tubular parts Grooves Simulation |
| Indexed By | SCI |
| Language | 英语 |
| WOS ID | WOS:000463670200065 |
| Publisher | SPRINGER LONDON LTD |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/81137 |
| Collection | 中国科学院金属研究所 |
| Recommended Citation GB/T 7714 | Guo, Xunzhong,Wang, Cheng,Xu, Yong,et al. Incremental forming characteristics of hollow parts with grooves[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,102(2020-01-04):829-837. |
| APA | Guo, Xunzhong,Wang, Cheng,Xu, Yong,Abd El-Aty, Ali,&Zhang, Shi-Hong.(2019).Incremental forming characteristics of hollow parts with grooves.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,102(2020-01-04),829-837. |
| MLA | Guo, Xunzhong,et al."Incremental forming characteristics of hollow parts with grooves".INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 102.2020-01-04(2019):829-837. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment