Knowledge Management System Of Institute of metal research,CAS
Microstructures and Mechanical Properties of a Newly Developed Austenitic Heat Resistant Steel | |
Liu, Peng; Chu, Zhao-Kuang; Yuan, Yong; Wang, Dao-Hong; Cui, Chuan-Yong; Hou, Gui-Chen; Zhou, Yi-Zhou; Sun, Xiao-Feng | |
2019-04-01 | |
Source Publication | ACTA METALLURGICA SINICA-ENGLISH LETTERS
![]() |
ISSN | 1006-7191 |
Volume | 32Issue:4Pages:517-525 |
Abstract | The effect of heat treatment on the microstructures and mechanical properties of a newly developed austenitic heat resistant steel (named as T8 alloy) for ultra-supercritical applications have been studied. Results show that the main phases in the alloy after solution treatment are and primary MX. Subsequent aging treatment causes the precipitation of M23C6 carbides along the grain boundaries and a small number of nanoscale MX inside the grains. In addition, with increasing the aging temperature and time, the morphology of M23C6 carbides changes from semi-continuous chain to continuous network. Compared with a commercial HR3C alloy, T8 alloy has comparable tensile strength, but higher stress rupture strength. The dominant cracking mechanism of the alloy during tensile test at room temperature is transgranular, while at high temperature, intergranular cracking becomes the main cracking mode, which may be caused by the precipitation of continuous M23C6 carbides along the grain boundaries. Typical intergranular cracking is the dominant cracking mode of the alloy at all stress rupture tests. |
Keyword | Austenitic heat resistant steel Microstructure Mechanical property Fracture mode |
Indexed By | SCI |
Language | 英语 |
WOS ID | WOS:000461434000011 |
Publisher | CHINESE ACAD SCIENCES, INST METAL RESEARCH |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.imr.ac.cn/handle/321006/81228 |
Collection | 中国科学院金属研究所 |
Recommended Citation GB/T 7714 | Liu, Peng,Chu, Zhao-Kuang,Yuan, Yong,et al. Microstructures and Mechanical Properties of a Newly Developed Austenitic Heat Resistant Steel[J]. ACTA METALLURGICA SINICA-ENGLISH LETTERS,2019,32(4):517-525. |
APA | Liu, Peng.,Chu, Zhao-Kuang.,Yuan, Yong.,Wang, Dao-Hong.,Cui, Chuan-Yong.,...&Sun, Xiao-Feng.(2019).Microstructures and Mechanical Properties of a Newly Developed Austenitic Heat Resistant Steel.ACTA METALLURGICA SINICA-ENGLISH LETTERS,32(4),517-525. |
MLA | Liu, Peng,et al."Microstructures and Mechanical Properties of a Newly Developed Austenitic Heat Resistant Steel".ACTA METALLURGICA SINICA-ENGLISH LETTERS 32.4(2019):517-525. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment