Knowledge Management System Of Institute of metal research，CAS
| Deformation compatibility between nanotwinned and recrystallized grains enhances resistance to interface cracking in cyclic loaded stainless steel | |
| Li, Q.; Yan, F. K.; Tao, N. R.; Ponge, D.; Raabe, D.; Lu, K. | |
| 2019-02-15 | |
| Source Publication | ACTA MATERIALIA
 |
| ISSN | 1359-6454 |
| Volume | 165Pages:87-98 |
| Abstract | Cracks often initiate at phase boundaries in conventional second phase reinforced alloys during cyclic loading, which limits their fatigue properties. Here, we prepared a nanotwin strengthened 316L stainless steel consisting of nanotwinned and recrystallized grains by using plastic deformation and subsequent partial recrystallization annealing. Fatigue tests revealed that interfaces separating hard nanotwinned grains from soft recrystallized ones exhibited excellent resistance to crack initiation. More than half of the cracks (57% in number fraction) are found in recrystallized grains while a small fraction (11%) is observed at the interfaces between nanotwinned and recrystallized grains. This is ascribed to the elastic homogeneity and cyclic deformation compatibility between nanotwinned and recrystallized grains. At small cumulative cyclic strains (below 4000 cycles at sigma(a) = 450 MPa), nanotwinned grains deform compatibly with the recrystallized grains without noticeable strain localization at their interfaces. Nanotwins can accommodate cyclic plastic strains by interaction of dislocations with twin boundaries, especially through the motion of the well-ordered threading dislocations inside the twin lamellae. At large cumulative strains, a moderate strain gradient is developed in recrystallized grains surrounding nanotwinned grains as a function of distance from the interfaces due to the occurrence of localized deformation in nanotwinned grains. The nanotwinned grains show high microstructural stability without notable de-twinnning, thus retarding crack initiation and propagation. Therefore, improved fatigue property with high fatigue limit of similar to 350 MPa and high fatigue ratio of similar to 0.45 is achieved in the nanotwin strengthened stainless steel, which is better than that of conventional second phase reinforced steels with comparable strength. (C) 2018 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. |
| Keyword | Nanotwins Fatigue Interface crack Cyclic deformation Austenitic steel |
| Indexed By | SCI |
| Language | 英语 |
| WOS ID | WOS:000457665100008 |
| Publisher | PERGAMON-ELSEVIER SCIENCE LTD |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/81365 |
| Collection | 中国科学院金属研究所 |
| Recommended Citation GB/T 7714 | Li, Q.,Yan, F. K.,Tao, N. R.,et al. Deformation compatibility between nanotwinned and recrystallized grains enhances resistance to interface cracking in cyclic loaded stainless steel[J]. ACTA MATERIALIA,2019,165:87-98. |
| APA | Li, Q.,Yan, F. K.,Tao, N. R.,Ponge, D.,Raabe, D.,&Lu, K..(2019).Deformation compatibility between nanotwinned and recrystallized grains enhances resistance to interface cracking in cyclic loaded stainless steel.ACTA MATERIALIA,165,87-98. |
| MLA | Li, Q.,et al."Deformation compatibility between nanotwinned and recrystallized grains enhances resistance to interface cracking in cyclic loaded stainless steel".ACTA MATERIALIA 165(2019):87-98. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment