Knowledge Management System Of Institute of metal research，CAS
| The origin of coarse macrograin during thermo-mechanical processing in a high temperature titanium alloy | |
| Gao, Xiongxiong; Zeng, Weidong; Ma, Haoyuan; Zhou, Dadi; Zhao, Qinyang; Wang, Qingjiang | |
| 2019-02-15 | |
| Source Publication | JOURNAL OF ALLOYS AND COMPOUNDS
 |
| ISSN | 0925-8388 |
| Volume | 775Pages:589-600 |
| Abstract | Coarse macrograins have been observed in aerospace components for a high temperature near-alpha titanium alloy Ti60. The present work was inspired to understand the origin of coarse macrograin and examine how strain affects the macro/microstructure. Thus, thermomechanical processing was conducted in alpha + beta phase field to simulate industrial production. This alloy with a bimodal microstructure was isothermally pre-deformed at 1019 degrees C and a constant strain rate of 0.1 s(-1) to height reductions of 15, 35, 55 and 75%. Heat treatment was conducted following deformation at 1024 degrees C for 30 min. The results showed that coarse macrograins originated from inadequate recrystallization of prior beta grains of initial billet. Deformation in the alpha + beta phase field does not form many new orientation beta grains but slightly scatters beta grain orientations around the orientations of big prior beta grains in small strain samples. Each of different coarse macrograins corresponds to a family of prior beta grains with similar crystallographic orientations with about 20 degrees of spread, which is outlined by secondary alpha (alpha(s)) plates having nearly parallel basal planes with similar crystallographic orientations. The size of macrograin decreases with increasing strain, which is consistent with the extent of recrystallization of prior beta grain. These understandings can be applied to optimize processing routes for the control of final macro/microstructure and properties in near-alpha titanium alloys. (C) 2018 Elsevier B.V. All rights reserved. |
| Keyword | Titanium alloy Macrostructure Microstructure Thermo-mechanical processing Crystallographic orientation |
| Indexed By | SCI |
| Language | 英语 |
| WOS ID | WOS:000450981100072 |
| Publisher | ELSEVIER SCIENCE SA |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/81373 |
| Collection | 中国科学院金属研究所 |
| Recommended Citation GB/T 7714 | Gao, Xiongxiong,Zeng, Weidong,Ma, Haoyuan,et al. The origin of coarse macrograin during thermo-mechanical processing in a high temperature titanium alloy[J]. JOURNAL OF ALLOYS AND COMPOUNDS,2019,775:589-600. |
| APA | Gao, Xiongxiong,Zeng, Weidong,Ma, Haoyuan,Zhou, Dadi,Zhao, Qinyang,&Wang, Qingjiang.(2019).The origin of coarse macrograin during thermo-mechanical processing in a high temperature titanium alloy.JOURNAL OF ALLOYS AND COMPOUNDS,775,589-600. |
| MLA | Gao, Xiongxiong,et al."The origin of coarse macrograin during thermo-mechanical processing in a high temperature titanium alloy".JOURNAL OF ALLOYS AND COMPOUNDS 775(2019):589-600. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment