Influence of annealing and substitution elements on damping capacity and strength of Fe-Cr-Al based alloys

IMR OpenIR

	Influence of annealing and substitution elements on damping capacity and strength of Fe-Cr-Al based alloys
	Lin, RR ; Liu, F ; Cao, MZ ; Yang, R
通讯作者	Lin, RR(rrlin@imr.ac.cn)
	2005-09-01
发表期刊	ACTA METALLURGICA SINICA
ISSN	0412-1961
卷号	41 期号:9 页码:958-962
摘要	The damping capacities and strengths of six alloys, Fe-13Cr-6Al, Fe-11.Cr-2 (Mo, Mn or Nb)-6Al, Fe-13Cr-5.5Al-0.5Cu, and Fe-13Cr-5Al-1Cu (atomic fraction, %) were measured. The effects of annealing temperature, cooling method and substitution elements on the above two properties were discussed by optical microscope observation and internal stresses analysis. The following results were obtained: (1) The damping capacity of Fe-13Cr-6Al based alloys increases with increasing annealing temperature while strength decreases. (2) The damping capacity of furnace cooling alloys is higher than water quenched alloys while the strength of the former is lower than the latter. (3) The substitution of 0.5%Cu decreases the interaction between dislocations and solute atoms while increases the elastic interaction between alloying atoms and base atoms, which improves both damping capacity and strength of the alloy.
关键词	Fe-Cr-Al based alloy damping capacity strength internal stress
收录类别	SCI
语种	英语
WOS研究方向	Metallurgy & Metallurgical Engineering
WOS类目	Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000232503700011
出版者	SCIENCE PRESS
引用统计
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/82178
通讯作者	Lin, RR
作者单位	1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China 2.China Aviat Ind Corp I, Shenyang Aeroengine Design & Res Inst, Shenyang 110015, Peoples R China
推荐引用方式 GB/T 7714	Lin, RR,Liu, F,Cao, MZ,et al. Influence of annealing and substitution elements on damping capacity and strength of Fe-Cr-Al based alloys[J]. ACTA METALLURGICA SINICA,2005,41(9):958-962.
APA	Lin, RR,Liu, F,Cao, MZ,&Yang, R.(2005).Influence of annealing and substitution elements on damping capacity and strength of Fe-Cr-Al based alloys.ACTA METALLURGICA SINICA,41(9),958-962.
MLA	Lin, RR,et al."Influence of annealing and substitution elements on damping capacity and strength of Fe-Cr-Al based alloys".ACTA METALLURGICA SINICA 41.9(2005):958-962.