Shear localization-martensitic transformation interactions in Fe-Cr-Ni monocrystal | |
Meyers, MA; Cao, BY; Nesterenko, VF; Benson, DJ; Xu, YB | |
通讯作者 | Meyers, MA(mameyers@ucsd.edu) |
2004-09-01 | |
发表期刊 | METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
![]() |
ISSN | 1073-5623 |
卷号 | 35A期号:9页码:2575-2586 |
摘要 | A Fe-15 wt pet Cr-15 wt pet Ni alloy monocrystal was deformed dynamically (strain rate similar to10(4) s(-1)) by the collapse of an explosively driven thick-walled cylinder under prescribed initial temperature and strain conditions. The experiments were carried out under the following conditions: (a) alloy in austenitic state, temperature above transformation temperature; (b) alloy in transformed state; and (c) alloy at temperature slightly above g,, propitiating concurrent shear-band propagation and martensitic transformation. The alloy exhibited profuse shear-band formation, which was a sensitive function of the deformation condition. Stress-assisted and strain-induced martensitic transformation competes with shear localization. The alloy deformed at a temperature slightly above g, shows a significantly reduced number of shear bands. The anisotropy of plastic deformation determines the evolution of strains and distribution of shear bands. The different conditions showed significant differences that are interpreted in terms of the microstructural anisotropy. Calculated shear-band spacings based on the Grady-Kipp (GK) and Wright-Ockendon (WO) theories are compared with the observed values. The microstructure within the shear bands was characterized by transmission electron microscopy. Regions of sub-micron grain sizes exhibiting evidence of recrystallization were observed, as well as amorphous regions possibly resulting from melting and rapid resolidification. |
收录类别 | SCI |
语种 | 英语 |
WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
WOS类目 | Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
WOS记录号 | WOS:000223678000005 |
出版者 | MINERALS METALS MATERIALS SOC |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.imr.ac.cn/handle/321006/82239 |
通讯作者 | Meyers, MA |
作者单位 | 1.Univ Calif San Diego, Dept Mech & Aerosp Engn, La Jolla, CA 92093 USA 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China |
推荐引用方式 GB/T 7714 | Meyers, MA,Cao, BY,Nesterenko, VF,et al. Shear localization-martensitic transformation interactions in Fe-Cr-Ni monocrystal[J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE,2004,35A(9):2575-2586. |
APA | Meyers, MA,Cao, BY,Nesterenko, VF,Benson, DJ,&Xu, YB.(2004).Shear localization-martensitic transformation interactions in Fe-Cr-Ni monocrystal.METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE,35A(9),2575-2586. |
MLA | Meyers, MA,et al."Shear localization-martensitic transformation interactions in Fe-Cr-Ni monocrystal".METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 35A.9(2004):2575-2586. |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论