Knowledge Management System Of Institute of metal research，CAS
| Dispersion and Damage of Carbon Nanotubes in Carbon Nanotube/7055Al Composites During High-Energy Ball Milling Process | |
| Bi, S.; Xiao, B. L.; Ji, Z. H.; Liu, B. S.; Liu, Z. Y.; Ma, Z. Y. | |
| 2020-10-08 | |
| Source Publication | ACTA METALLURGICA SINICA-ENGLISH LETTERS
 |
| Abstract | High-energy ball milling (HEBM) combined with powder metallurgy route was used to fabricate carbon nanotube (CNT) reinforced 7055Al composites. Two powder morphology evolution processes (HEBM-1 and HEBM-2) were designed to investigate the dispersion and damage of CNTs during HEBM process. HEBM-1 evolution process involved powder flattening, cold-welding and fracture, while HEBM-2 evolution process consisted of powder flattening and fracture. For HEBM-1, the repetitive fracture and cold-welding process was effective for dispersing CNTs. However, the powder flattening process in HEBM-2 was unsuccessful in dispersing CNTs due to two reasons: (1) the thickness of flaky Al powders exceeded the critical value, and (2) the clustered CNTs embedded in flaky Al powders could not be unravelled. Because of the broadening of D band and the appearance of a new defect-related D' band, product ofI(D)/I(G)and full width half maximum of D band, rather thanI(D)/I-G, was used to evaluate the actual damage of CNTs. It indicates that the damage of CNTs was severe in powder flattening and fracture stages, while the damage of CNTs was small in powder cold-welding stage. |
| DOI | 10.1007/s40195-020-01138-5 |
| WOS ID | WOS:000578527900001 |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/82448 |
| Collection | 中国科学院金属研究所 |
| Recommended Citation GB/T 7714 | Bi, S.,Xiao, B. L.,Ji, Z. H.,et al. Dispersion and Damage of Carbon Nanotubes in Carbon Nanotube/7055Al Composites During High-Energy Ball Milling Process[J]. ACTA METALLURGICA SINICA-ENGLISH LETTERS,2020. |
| APA | Bi, S.,Xiao, B. L.,Ji, Z. H.,Liu, B. S.,Liu, Z. Y.,&Ma, Z. Y..(2020).Dispersion and Damage of Carbon Nanotubes in Carbon Nanotube/7055Al Composites During High-Energy Ball Milling Process.ACTA METALLURGICA SINICA-ENGLISH LETTERS. |
| MLA | Bi, S.,et al."Dispersion and Damage of Carbon Nanotubes in Carbon Nanotube/7055Al Composites During High-Energy Ball Milling Process".ACTA METALLURGICA SINICA-ENGLISH LETTERS (2020). |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment