Knowledge Management System Of Institute of metal research,CAS
Achieving strong friction lap joints of carbon-fiber reinforced plastic and metals by modifying metal surface structure via laser-processing pretreatment | |
Wu, L. H.; Xiao, B. L.; Nagatsuka, K.; Nakata, K.; Ma, Z. Y. | |
2020-06-15 | |
Source Publication | COMPOSITE STRUCTURES
![]() |
Volume | 242 |
Abstract | Strong dissimilar joints of metals and carbon fiber reinforced plastic (CFRP) are highly demanded for the lightweight design in many fields, which, however, are rather challenging to achieve directly via welding. In this study, 5052 Al alloy and plain carbon steel were first pretreated by a laser-processing method to create rather coarse porous metal surfaces, which were then welded to polyamide 6 based CFRP using friction lap joining. The maximum tensile shear force of the dissimilar joints of CFRP-Al alloy and CFRP-steel achieved 4.9 kN, and 3.9 kN, respectively, and the joint efficiency achieved 78% and 62%, respectively, which were more than three times as those of the CFRP- as-received metal joints. This is the first report on the strengthening of the metal-CFRP friction based joints via the assisting laser treatment technique. The significant improvement of the joint strength could be attributed to a great increase of the mechanical anchors and the chemical bonding area at the metal-CFRP interface. |
DOI | 10.1016/j.compstruct.2020.112167 |
WOS ID | WOS:000539330600003 |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.imr.ac.cn/handle/321006/82771 |
Collection | 中国科学院金属研究所 |
Recommended Citation GB/T 7714 | Wu, L. H.,Xiao, B. L.,Nagatsuka, K.,et al. Achieving strong friction lap joints of carbon-fiber reinforced plastic and metals by modifying metal surface structure via laser-processing pretreatment[J]. COMPOSITE STRUCTURES,2020,242. |
APA | Wu, L. H.,Xiao, B. L.,Nagatsuka, K.,Nakata, K.,&Ma, Z. Y..(2020).Achieving strong friction lap joints of carbon-fiber reinforced plastic and metals by modifying metal surface structure via laser-processing pretreatment.COMPOSITE STRUCTURES,242. |
MLA | Wu, L. H.,et al."Achieving strong friction lap joints of carbon-fiber reinforced plastic and metals by modifying metal surface structure via laser-processing pretreatment".COMPOSITE STRUCTURES 242(2020). |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment