Knowledge Management System Of Institute of metal research，CAS
| Effect of heat treatment on microstructures and tensile properties of TA19 alloy fabricated by laser metal deposition | |
| Wang, Fang; Lei, Li-Ming; Fu, Xin; Song, Zhu-Man; Shi, Lei; Zhang, Bin; Zhang, Guang-Ping | |
| 2020-04-24 | |
| Source Publication | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
 |
| Volume | 782 |
| Abstract | Influences of solution temperature and subsequent cooling rate on microstructures and room temperature tensile properties of near alpha-TA19 alloy (Ti-6Al-2Sn-4Zr-2Mo-0.1Si) manufactured by laser metal deposition were investigated. The results show that after the solution and aging treatment, fine Basketweave structure of the as-fabricated TA19 alloy was transformed into Widmannstatten structure for the samples heat treated in the single beta phase region and double lamellar special bimodal structure for those heat treated in the alpha+beta two-phase region. The as-fabricated TA19 samples subjected to solution treatment at 1000 degrees C with subsequent oil cooling and aging treatment have a good synergy of strength and plasticity due to the best combination of the content and width of alpha(p) and alpha(s)+alpha' martensite phases. Not only the widths of alpha(p) and alpha(s)/alpha' martensite phases affect the yield stress of the alloy, but also the phase contents of the double lamellar special bimodal structure alloy play an important role. The rule of mixtures is developed to predict the yield stress of the LMD-fabricated TA19 alloy after heat treatment in the alpha+beta two-phase region. |
| DOI | 10.1016/j.msea.2020.139284 |
| WOS ID | WOS:000525797900022 |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/82939 |
| Collection | 中国科学院金属研究所 |
| Recommended Citation GB/T 7714 | Wang, Fang,Lei, Li-Ming,Fu, Xin,et al. Effect of heat treatment on microstructures and tensile properties of TA19 alloy fabricated by laser metal deposition[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2020,782. |
| APA | Wang, Fang.,Lei, Li-Ming.,Fu, Xin.,Song, Zhu-Man.,Shi, Lei.,...&Zhang, Guang-Ping.(2020).Effect of heat treatment on microstructures and tensile properties of TA19 alloy fabricated by laser metal deposition.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,782. |
| MLA | Wang, Fang,et al."Effect of heat treatment on microstructures and tensile properties of TA19 alloy fabricated by laser metal deposition".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 782(2020). |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment