IMR OpenIR
Mechanically milling-induced amorphization in Sn-containing Ti-based multicomponent alloy systems
Zhang, LC; Shen, ZQ; Xu, J
通讯作者Xu, J(jianxu@imr.ac.cn)
2005-03-15
发表期刊MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
ISSN0921-5093
卷号394期号:1-2页码:204-209
摘要Two Sn-containing Ti-based multicomponent alloys, Ti50Cu35Ni12Sn3 and Ti50Cu18Ni22Al4Sn6, were chosen to investigate the amorphization of pre-alloyed fragments under high-energy ball milling. For comparison, the amorphous alloy ribbons with the same compositions were also prepared using melt-spinning method. Amorphous nature of the as-prepared samples was characterized using X-ray diffraction, transmission electron microscopy (TEM) and differential scanning calorimetry (DSC). For the ball-milled (BM) Ti50Cu35Ni12Sn3 alloy, the glass formation is predominant but a small fraction of the alpha-Ti nanocrystals still remains unreacted. In contrast, the complete amorphization can be achieved in the ball-milled Ti50Cu18Ni22Al4Sn6 alloy. In both cases, thermal properties of the ball-milled glassy alloys are comparable to those of the melt-spun (MS) glasses, exhibiting a distinct glass transition and wide supercooled liquid region about 60 K. The amorphization extent in the final milled products is associated with whether the a-Ti phase exists in the initial microstructure of the alloys as starting materials. (c) 2004 Elsevier B.V. All rights reserved.
关键词ball milling amorphous alloys supercooled liquid region crystallization Ti alloys
DOI10.1016/j.msea.2004.11.051
收录类别SCI
语种英语
WOS研究方向Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目Nanoscience & Nanotechnology ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
WOS记录号WOS:000228069000025
出版者ELSEVIER SCIENCE SA
引用统计
文献类型期刊论文
条目标识符http://ir.imr.ac.cn/handle/321006/83021
通讯作者Xu, J
作者单位CAS, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China
推荐引用方式
GB/T 7714
Zhang, LC,Shen, ZQ,Xu, J. Mechanically milling-induced amorphization in Sn-containing Ti-based multicomponent alloy systems[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2005,394(1-2):204-209.
APA Zhang, LC,Shen, ZQ,&Xu, J.(2005).Mechanically milling-induced amorphization in Sn-containing Ti-based multicomponent alloy systems.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,394(1-2),204-209.
MLA Zhang, LC,et al."Mechanically milling-induced amorphization in Sn-containing Ti-based multicomponent alloy systems".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 394.1-2(2005):204-209.
条目包含的文件
条目无相关文件。
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[Zhang, LC]的文章
[Shen, ZQ]的文章
[Xu, J]的文章
百度学术
百度学术中相似的文章
[Zhang, LC]的文章
[Shen, ZQ]的文章
[Xu, J]的文章
必应学术
必应学术中相似的文章
[Zhang, LC]的文章
[Shen, ZQ]的文章
[Xu, J]的文章
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。