| A q-state Potts model-based Monte Carlo method used to model the isothermal austenite-ferrite transformation under non-equilibrium interface condition |
| Tong, MM; Li, DZ; Li, YY
|
通讯作者 | Tong, MM(mingming_tong@hotmail.com)
|
| 2005-03-01
|
发表期刊 | ACTA MATERIALIA
 |
ISSN | 1359-6454
|
卷号 | 53期号:5页码:1485-1497 |
摘要 | A q-state Potts model-based Monte Carlo method is developed to model the austenite-ferrite transformation, which occurs during the isothermal austenite decomposition with a non-equilibrium austenite-ferrite interface in an Fe-C binary system on a mesoscale. In this simulation, the carbon diffusion in the ferrite is allowed and the carbon diffusion simulation is independent of the numerical solution of the diffusion equation. During the isothermal austenite decomposition, the non-equilibrium austenite-ferrite interface is mixed diffusion/interface controlled. It is found that the characteristic of the transformation varies as the transformation proceeds. The effects of the bulk carbon concentration and the soaking temperature on the characteristics of the isothermal austenite-ferrite transformation are investigated. (C) 2004 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. |
关键词 | Monte Carlo
non-equilibrium interface
mesoscale
mixed model control
austenite decomposition
|
DOI | 10.1016/j.actamat.2004.12.002
|
收录类别 | SCI
|
语种 | 英语
|
WOS研究方向 | Materials Science
; Metallurgy & Metallurgical Engineering
|
WOS类目 | Materials Science, Multidisciplinary
; Metallurgy & Metallurgical Engineering
|
WOS记录号 | WOS:000227265100023
|
出版者 | PERGAMON-ELSEVIER SCIENCE LTD
|
引用统计 |
|
文献类型 | 期刊论文
|
条目标识符 | http://ir.imr.ac.cn/handle/321006/83109
|
通讯作者 | Tong, MM |
作者单位 | Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China
|
推荐引用方式 GB/T 7714 |
Tong, MM,Li, DZ,Li, YY. A q-state Potts model-based Monte Carlo method used to model the isothermal austenite-ferrite transformation under non-equilibrium interface condition[J]. ACTA MATERIALIA,2005,53(5):1485-1497.
|
APA |
Tong, MM,Li, DZ,&Li, YY.(2005).A q-state Potts model-based Monte Carlo method used to model the isothermal austenite-ferrite transformation under non-equilibrium interface condition.ACTA MATERIALIA,53(5),1485-1497.
|
MLA |
Tong, MM,et al."A q-state Potts model-based Monte Carlo method used to model the isothermal austenite-ferrite transformation under non-equilibrium interface condition".ACTA MATERIALIA 53.5(2005):1485-1497.
|
修改评论