Fabrication of textured Ti2AlC lamellar composites with improved mechanical properties

doi:10.1016/j.jmst.2019.05.070

IMR OpenIR

	Fabrication of textured Ti2AlC lamellar composites with improved mechanical properties
	Xie, Xi; Yang, Rui; Cui, Yuyou; Jia, Qing; Bai, Chunguang
	2020-02-01
Source Publication	JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
Volume	38 Pages:86-92
Abstract	Textured Ti2AlC lamellar composites have been successfully fabricated by a new method in the present work. The composites exhibit high compressive strength of ca 2 GPa, fracture toughness of 8.5 MPa m(1/2) (//c-axis), flexural strength of 735 MPa (//c-axis) and high hardness of 7.9 GPa (//c-axis). The strengthening mechanisms were discussed. The sintering and densification process was investigated and crystal orientation and microstructure were studied by electron backscattered diffraction techniques. The synthesis temperature is reduced to 1200 degrees C by using high surface-to-volume ratio Ti2AlC nano flakes. The Lotgering orientation factor of Ti2AlC and Ti3AlC2 {00l} planes in the textured top surface reaches 0.74 and 0.49, respectively. This new route may shed light on resolving the difficulties encountered in large scale fabrication of textured MAX phases. (C) 2019 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.
DOI	10.1016/j.jmst.2019.05.070
WOS ID	WOS:000503164100011
Citation statistics
Document Type	期刊论文
Identifier	http://ir.imr.ac.cn/handle/321006/83149
Collection	中国科学院金属研究所
Recommended Citation GB/T 7714	Xie, Xi,Yang, Rui,Cui, Yuyou,et al. Fabrication of textured Ti2AlC lamellar composites with improved mechanical properties[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,2020,38:86-92.
APA	Xie, Xi,Yang, Rui,Cui, Yuyou,Jia, Qing,&Bai, Chunguang.(2020).Fabrication of textured Ti2AlC lamellar composites with improved mechanical properties.JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,38,86-92.
MLA	Xie, Xi,et al."Fabrication of textured Ti2AlC lamellar composites with improved mechanical properties".JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 38(2020):86-92.

Files in This Item:
There are no files associated with this item.

If you have any objections to this item, please fill out the form below and the administrator will contact you as soon as possible.
Content:
Email：	*
Institution:
Verification Code:	Refresh

Any comments and suggestions are welcomed.
Title:	*
Content:
Email：	*
Verification Code:	Refresh

中国科学院金属研究所机构知识库