Fabrication of bulk amorphous Mg65Cu25Gd10 alloy of 12mm rod by water quenching

IMR OpenIR

	Fabrication of bulk amorphous Mg65Cu25Gd10 alloy of 12mm rod by water quenching
	Liu, WY ; Zhang, HF ; Hu, ZQ ; Wang, H ; Yao, XD
通讯作者	Zhang, HF(hfzhang@imr.ac.cn)
	2005
发表期刊	MAGNESIUM - SCIENCE, TECHNOLOGY AND APPLICATIONS
ISSN	0255-5476
卷号	488-489 页码:211-214
摘要	Bulk armorphous Mg(65)Cu(25)Gd(10) alloy of 12mm rods were prepared by water quenching the molten alloy in the stainless steel tube. Neither cavities nor voids are seen over the whole range and no contrast revealing a crystalline phase is seen over the transverse cross section. The glass transition temperature (T(g)), crystallization temperature (T(x)), the melting temperature (T(m)) and the liquidus temperature (T(l)) are measured to be 419K, 492K, 702K, 735K, respectively, for the Mg(65)Cu(25)Gd(10) alloy with a diameter of 12mm. These temperatures are similar with those of the alloy with a diameter of 8mm produced by metallic mould casting. Both alloys have the same Vickers hardness about 260. Water quenching can further improve the critical diameter of glassy rods, so it is qualified for the formation of the bulk alloys.
关键词	bulk armorphous alloy Mg-base alloy Mg(65)Cu(25)Gd(10) water quenching
收录类别	SCI
语种	英语
WOS研究方向	Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目	Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000230390900047
出版者	TRANS TECH PUBLICATIONS LTD
引用统计	被引频次：1[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/83482
专题	中国科学院金属研究所
通讯作者	Zhang, HF
作者单位	1.Chinese Acad Sci, Grad Sch, Beijing 100039, Peoples R China 2.Univ Queensland, Sch Engn, Brisbane, Qld 4072, Australia 3.Chinese Acad Sci, Met Res Inst, Shenyang Natl Lab Mat Sci, Shenyang 110006, Peoples R China
推荐引用方式 GB/T 7714	Liu, WY,Zhang, HF,Hu, ZQ,et al. Fabrication of bulk amorphous Mg65Cu25Gd10 alloy of 12mm rod by water quenching[J]. MAGNESIUM - SCIENCE, TECHNOLOGY AND APPLICATIONS,2005,488-489:211-214.
APA	Liu, WY,Zhang, HF,Hu, ZQ,Wang, H,&Yao, XD.(2005).Fabrication of bulk amorphous Mg65Cu25Gd10 alloy of 12mm rod by water quenching.MAGNESIUM - SCIENCE, TECHNOLOGY AND APPLICATIONS,488-489,211-214.
MLA	Liu, WY,et al."Fabrication of bulk amorphous Mg65Cu25Gd10 alloy of 12mm rod by water quenching".MAGNESIUM - SCIENCE, TECHNOLOGY AND APPLICATIONS 488-489(2005):211-214.