The effects of bonding temperature, pressure and holding time on the shear strength of diffusion bonded Ti3SiC2/Ni joints

IMR OpenIR

	The effects of bonding temperature, pressure and holding time on the shear strength of diffusion bonded Ti3SiC2/Ni joints
	Yin Xiaohui ; Li Meishuan ; Wang Yang ; Zhou Yanchun
通讯作者	Li Meishuan(mshli@imr.ac.en)
	2007-08-01
发表期刊	RARE METAL MATERIALS AND ENGINEERING
ISSN	1002-185X
卷号	36 页码:461-464
摘要	Diffusion bonding of Ti3SiC2 and nickel has been conducted at temperatures of 800 similar to 1100 degrees C for 10 similar to 90 min under 6 similar to 20 MPa in vacuum. The effects of bonding temperature, bonding pressure and holding time were studied by orthogonal experiments. Joints strengths were determined through shear test. The results demonstrated that the maximum shear strength of (121 +/- 7) MPa, which is close to the shear strength of Ti3SiC2, has been obtained in the condition of 1000 degrees C for 10 min under 20 MPa.
关键词	Ti3SiC2 Ni diffusion bond shear strength
收录类别	SCI
语种	英语
WOS研究方向	Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目	Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000250915200133
出版者	NORTHWEST INST NONFERROUS METAL RESEARCH
引用统计	被引频次：2[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/89129
专题	中国科学院金属研究所
通讯作者	Li Meishuan
作者单位	1.Chinese Acad Sci, Met Res Inst, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China 2.Chinese Acad Sci, Grad Sch, Beijing 100039, Peoples R China
推荐引用方式 GB/T 7714	Yin Xiaohui,Li Meishuan,Wang Yang,et al. The effects of bonding temperature, pressure and holding time on the shear strength of diffusion bonded Ti3SiC2/Ni joints[J]. RARE METAL MATERIALS AND ENGINEERING,2007,36:461-464.
APA	Yin Xiaohui,Li Meishuan,Wang Yang,&Zhou Yanchun.(2007).The effects of bonding temperature, pressure and holding time on the shear strength of diffusion bonded Ti3SiC2/Ni joints.RARE METAL MATERIALS AND ENGINEERING,36,461-464.
MLA	Yin Xiaohui,et al."The effects of bonding temperature, pressure and holding time on the shear strength of diffusion bonded Ti3SiC2/Ni joints".RARE METAL MATERIALS AND ENGINEERING 36(2007):461-464.