| Performance of the Single-Chamber Solid Oxide Fuel Cell with a La0.75Sr0.25Cr0.5Mn0.5O3-delta-Based Perovskite Anode | |
| Zhu, Xingbao1; Lue, Zhe1; Wei, Bo1; Zhang, Yaohui1; Liu, Mingliang1; Huang, Xiqiang1; Su, Wenhui1,2 | |
| Corresponding Author | Zhu, Xingbao(zhuxingbao008@163.com) |
| 2010 | |
| Source Publication | JOURNAL OF THE ELECTROCHEMICAL SOCIETY
 |
| ISSN | 0013-4651 |
| Volume | 157Issue:5Pages:B691-B696 |
| Abstract | In this paper, perovskite oxide La0.75Sr0.25Cr0.5Mn0.5O3-delta (LSCM) mixed with a small fraction Ni has been used as the anode of single-chamber solid oxide fuel cell(s) operating in a methane-oxygen mixture. The anode is prepared by an ion impregnation method, whereby a proper mixed solution with metal nitrates and urea is incorporated into the porous presintered yttria-stabilized zirconia (YSZ) anode matrix. After sintering at 1100 degrees C, the impregnated materials change to unique microparticles adhered to the YSZ matrix. These microparticles themselves become porous after reducing in single-chamber conditions, and this porous character is expected to facilitate the anode reaction because it would improve the gas transport. The influence of the environmental temperature and gas composition on the cell performance is also investigated. A maximum power density of 285 mW/cm(2) is achieved at a gas composition of CH4:O-2 approximate to 2:1 and a furnace temperature of 800 degrees C. The redox cycling test demonstrates that the stability of the LSCM-based anode is better compared to the conventional Ni-YSZ anode. |
| Keyword | catalysis catalysts chromium compounds electrochemical electrodes lanthanum compounds nickel oxidation porosity porous materials reduction (chemical) sintering solid oxide fuel cells strontium compounds yttrium compounds zirconium compounds |
| Funding Organization | National High Technology Research Development Project of China |
| DOI | 10.1149/1.3357122 |
| Indexed By | SCI |
| Language | 英语 |
| Funding Project | National High Technology Research Development Project of China[2007AA05Z139] |
| WOS Research Area | Electrochemistry ; Materials Science |
| WOS Subject | Electrochemistry ; Materials Science, Coatings & Films |
| WOS ID | WOS:000276555300022 |
| Publisher | ELECTROCHEMICAL SOC INC |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/100156 |
| Collection | 中国科学院金属研究所 |
| Corresponding Author | Zhu, Xingbao |
| Affiliation | 1.Harbin Inst Technol, Dept Phys, Ctr Condensed Matter Sci & Technol, Harbin 150080, Peoples R China 2.Int Ctr Mat Phys, Shenyang 110015, Peoples R China |
| Recommended Citation GB/T 7714 | Zhu, Xingbao,Lue, Zhe,Wei, Bo,et al. Performance of the Single-Chamber Solid Oxide Fuel Cell with a La0.75Sr0.25Cr0.5Mn0.5O3-delta-Based Perovskite Anode[J]. JOURNAL OF THE ELECTROCHEMICAL SOCIETY,2010,157(5):B691-B696. |
| APA | Zhu, Xingbao.,Lue, Zhe.,Wei, Bo.,Zhang, Yaohui.,Liu, Mingliang.,...&Su, Wenhui.(2010).Performance of the Single-Chamber Solid Oxide Fuel Cell with a La0.75Sr0.25Cr0.5Mn0.5O3-delta-Based Perovskite Anode.JOURNAL OF THE ELECTROCHEMICAL SOCIETY,157(5),B691-B696. |
| MLA | Zhu, Xingbao,et al."Performance of the Single-Chamber Solid Oxide Fuel Cell with a La0.75Sr0.25Cr0.5Mn0.5O3-delta-Based Perovskite Anode".JOURNAL OF THE ELECTROCHEMICAL SOCIETY 157.5(2010):B691-B696. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment