| Effects of feeding ratio on flange bending in shear spinning | |
| Zhang, Shi-Hong1; Lu, Xin-Yu1; Liu, Hai1; Hou, Hong-Liang2; Li, Zhi-Qiang2; Zeng, Yuan-Song2 | |
| 通讯作者 | Zhang, Shi-Hong(shzhang@imr.ac.cn) |
| 2011-12-01 | |
| 发表期刊 | INTERNATIONAL JOURNAL OF MATERIAL FORMING
 |
| ISSN | 1960-6206 |
| 卷号 | 4期号:4页码:413-419 |
| 摘要 | The effects of feeding ratio on flange bending of shear spinning are investigated with analytical method. Firstly, influence of feeding ratio on total energy is analyzed utilizing the formula of shear spinning force and power derived by energy method. Subsequently, the connection between the deviation ratio and the thinning ratio, and the influence of feeding ratio on the thinning ratio are researched. Finally, the conclusions about the deviation ratio and flange bending are adopted to reveal the influential tendency of feeding ratio on flange bending. The results show that the flange bending towards headstock weakens with the increase of feeding ratio, which is verified by the experimental results very well. It indicates that the calculation method in this paper is reasonable. |
| 关键词 | Shear spinning Flange bending Feeding ratio Energy method |
| DOI | 10.1007/s12289-010-1005-8 |
| 收录类别 | SCI |
| 语种 | 英语 |
| WOS研究方向 | Engineering ; Materials Science ; Metallurgy & Metallurgical Engineering |
| WOS类目 | Engineering, Manufacturing ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
| WOS记录号 | WOS:000307243800006 |
| 出版者 | SPRINGER FRANCE |
| 引用统计 | |
| 文献类型 | 期刊论文 |
| 条目标识符 | http://ir.imr.ac.cn/handle/321006/103652 |
| 专题 | 中国科学院金属研究所 |
| 通讯作者 | Zhang, Shi-Hong |
| 作者单位 | 1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China 2.Beijing Aeronaut Mfg Technol Res Inst, Beijing 100024, Peoples R China |
| 推荐引用方式 GB/T 7714 | Zhang, Shi-Hong,Lu, Xin-Yu,Liu, Hai,et al. Effects of feeding ratio on flange bending in shear spinning[J]. INTERNATIONAL JOURNAL OF MATERIAL FORMING,2011,4(4):413-419. |
| APA | Zhang, Shi-Hong,Lu, Xin-Yu,Liu, Hai,Hou, Hong-Liang,Li, Zhi-Qiang,&Zeng, Yuan-Song.(2011).Effects of feeding ratio on flange bending in shear spinning.INTERNATIONAL JOURNAL OF MATERIAL FORMING,4(4),413-419. |
| MLA | Zhang, Shi-Hong,et al."Effects of feeding ratio on flange bending in shear spinning".INTERNATIONAL JOURNAL OF MATERIAL FORMING 4.4(2011):413-419. |
| 条目包含的文件 | 条目无相关文件。 | |||||
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。
修改评论