| Wear behavior of brazed WC/NiCrBSi(Co) composite coatings | |
| Lu, SP; Kwon, OY; Guo, Y | |
| Corresponding Author | Lu, SP() |
| 2003-03-01 | |
| Source Publication | WEAR
 |
| ISSN | 0043-1648 |
| Volume | 254Issue:5-6Pages:421-428 |
| Abstract | A metallurgically bonded composite coating of a Ni-Cr-B-Si alloy reinforced with cobalt-coated tungsten carbide (WC-Co) particles was produced on a carbon steel substrate by high temperature vacuum brazing. The bond strength of the coating/substrate interface and the tensile strength of the coating itself reached 300-360 and 100-140 MPa, respectively. Effects of Co and WC-17Co contents on the wear behavior of the coating have been systematically investigated at two different wear conditions, namely the high speed rotating slurry erosive wear and the wet sand/rubber wheel abrasive wear. Results show that the higher was the Co content in the coating, the lower were the hardness and wear resistance. In the slurry erosive wear, the WC reinforcement of the composite coating plays an important role protecting the matrix from being worn-out, whereas in the abrasive wear, the wear mechanism is mainly controlled by the scratching and micro-cutting of the matrix followed by the pull out of WC particles due to the scratching action of abrasives. The wear resistance of the brazed composite coating (WC/NiCrBSi(Co)) is better than that of the flame overlaid coating. (C) 2003 Elsevier Science B.V. All rights reserved. |
| Keyword | composite coating tungsten carbide nickel-base alloy vacuum brazing bond strength wear resistance |
| DOI | 10.1016/S0043-1648(03)00132-7 |
| Indexed By | SCI |
| Language | 英语 |
| WOS Research Area | Engineering ; Materials Science |
| WOS Subject | Engineering, Mechanical ; Materials Science, Multidisciplinary |
| WOS ID | WOS:000183454000005 |
| Publisher | ELSEVIER SCIENCE SA |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/117409 |
| Collection | 中国科学院金属研究所 |
| Corresponding Author | Lu, SP |
| Affiliation | 1.Inha Univ, Dept Mech Engn, Inchon 402751, South Korea 2.Chinese Acad Sci, Met Res Inst, Shenyang 110015, Peoples R China |
| Recommended Citation GB/T 7714 | Lu, SP,Kwon, OY,Guo, Y. Wear behavior of brazed WC/NiCrBSi(Co) composite coatings[J]. WEAR,2003,254(5-6):421-428. |
| APA | Lu, SP,Kwon, OY,&Guo, Y.(2003).Wear behavior of brazed WC/NiCrBSi(Co) composite coatings.WEAR,254(5-6),421-428. |
| MLA | Lu, SP,et al."Wear behavior of brazed WC/NiCrBSi(Co) composite coatings".WEAR 254.5-6(2003):421-428. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment