| STUDY OF SOLIDIFICATION FOR GAS-ATOMIZED DROPLET OF Cu-Co-Fe ALLOY | |
| Zhao Lei1,2; Jiang Hongxiang2; Ahmad, Tauseef2; Zhao Jiuzhou2 | |
| Corresponding Author | Zhao Jiuzhou(jzzhao@imr.ac.cn) |
| 2015-07-11 | |
| Source Publication | ACTA METALLURGICA SINICA
 |
| ISSN | 0412-1961 |
| Volume | 51Issue:7Pages:883-888 |
| Abstract | Cu-Co-Fe alloys have excellent properties such as high strength, high electrical conductivity and giant magneto resistance (GMR). These alloys are promising candidates to be used as electric contactors, integrated circuit lead frame, wires & cables, ferromagnetism materials. However, the manufacturing of Cu-Co-Fe alloys is extremely difficult due to the presence of metastable miscibility gap in the liquid state. The liquid-liquid decomposition generally leads to serious phase segregated microstructure during the conventional solidification process. Studies in recent years reveal that rapid solidification techniques can effectively suppress the liquid phase separation. In this work, rapid solidification experiment is carried out with Cu-10%Co-10%Fe (mass fraction) alloy by using the high pressure gas atomization technique. Powders having composite microstructure with the Fe-Co-rich particles homogeneously dispersing in the Cu matrix are obtained. A model is developed to describe the microstructure evolution in an atomized droplet of Cu-Co-Fe alloy during the liquid-liquid phase transformation. The microstructure formation is simulated by coupling the thermodynamic and kinetic calculations. The favorable agreements between the calculated and experimental results for the powders of different sizes indicate that the model describes the microstructure evolution in the atomized droplets of Cu-Co-Fe alloy well. The results demonstrate that the effect of the Marangoni migration and Ostwald coarsening of the Fe-Co-rich droplets are very week under the rapid cooling conditions of gas atomization. For Cu-10%Co-10%Fe powders with diameter less than 220 mu m, the average radius R-a and number density N of the Fe-Co-rich particles depend exponentially on the powder diameter d. |
| Keyword | Cu-Co-Fe alloy liquid phase decomposition rapid solidification modeling and simulation |
| Funding Organization | National Natural Science Foundation of China |
| Indexed By | SCI |
| Language | 英语 |
| Funding Project | National Natural Science Foundation of China[51271185] ; National Natural Science Foundation of China[51031003] ; National Natural Science Foundation of China[51471173] |
| WOS Research Area | Metallurgy & Metallurgical Engineering |
| WOS Subject | Metallurgy & Metallurgical Engineering |
| WOS ID | WOS:000358471900015 |
| Publisher | SCIENCE PRESS |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/120431 |
| Collection | 中国科学院金属研究所 |
| Corresponding Author | Zhao Jiuzhou |
| Affiliation | 1.Liaoning Shihua Univ, Sch Mech Engn, Fushun 113001, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China |
| Recommended Citation GB/T 7714 | Zhao Lei,Jiang Hongxiang,Ahmad, Tauseef,et al. STUDY OF SOLIDIFICATION FOR GAS-ATOMIZED DROPLET OF Cu-Co-Fe ALLOY[J]. ACTA METALLURGICA SINICA,2015,51(7):883-888. |
| APA | Zhao Lei,Jiang Hongxiang,Ahmad, Tauseef,&Zhao Jiuzhou.(2015).STUDY OF SOLIDIFICATION FOR GAS-ATOMIZED DROPLET OF Cu-Co-Fe ALLOY.ACTA METALLURGICA SINICA,51(7),883-888. |
| MLA | Zhao Lei,et al."STUDY OF SOLIDIFICATION FOR GAS-ATOMIZED DROPLET OF Cu-Co-Fe ALLOY".ACTA METALLURGICA SINICA 51.7(2015):883-888. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment