Preparation of Micro Porous Stainless Steel by Physical Vacuum Dealloying | |
Li Jun1,2; Liu Wenpeng1,3; Ren Yibin1; Shen Minggang3; Yang Ke1 | |
Corresponding Author | Ren Yibin(ybren@imr.ac.cn) |
2017-05-11 | |
Source Publication | ACTA METALLURGICA SINICA
![]() |
ISSN | 0412-1961 |
Volume | 53Issue:5Pages:524-530 |
Abstract | More and more attentions have been paid to porous stainless steel, as the excellent performance in the physical, chemical and mechanical properties, in the field of solid oxide fuel cell, medical drug for implantable devices and so on. In this work, a new method called physical vacuum dealloying has been applied to produce porous stainless steel. Firstly, 316L-50Mn initial alloy was successfully melted by vacuum induction furnace, then the porous stainless steel was developed by 316L-50Mn after heat treatment in vacuum environment in this experiment. SEM, EDS and XRD were used to analyze the porous stainless steel made by physical vacuum dealloying method. Meanwhile, the effects of temperature and time on the formation, development and morphology of pores during the dealloying process were also studied. The results show that it was effective to produce porous stainless steel by physical vacuum dealloying method. The porosity of micro pores in porous stainless steel is 30%similar to 60%, with 0.5 similar to 3 mu m pore size, and the 15 similar to 60 mm thickness. The temperature mainly affects the hole formation and development by influencing the evaporation and bulk diffusion rate of Mn element, and time plays a major role in the thickness of the porous layer in the process of preparing porous stainless steel. |
Keyword | porous stainless steel physical vacuum dealloying micro pore Kirkendall effect diffusion rate |
Funding Organization | National Natural Science Foundation of China ; National Basic Research Program of China |
DOI | 10.11900/0412.1961.2016.00260 |
Indexed By | SCI |
Language | 英语 |
Funding Project | National Natural Science Foundation of China[31370976] ; National Basic Research Program of China[2012CB619101] |
WOS Research Area | Metallurgy & Metallurgical Engineering |
WOS Subject | Metallurgy & Metallurgical Engineering |
WOS ID | WOS:000399922300002 |
Publisher | SCIENCE PRESS |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.imr.ac.cn/handle/321006/124597 |
Collection | 中国科学院金属研究所 |
Corresponding Author | Ren Yibin |
Affiliation | 1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, Hefei 230026, Peoples R China 3.Univ Sci & Technol Liaoning, Sch Met & Mat, Anshan 114051, Peoples R China |
Recommended Citation GB/T 7714 | Li Jun,Liu Wenpeng,Ren Yibin,et al. Preparation of Micro Porous Stainless Steel by Physical Vacuum Dealloying[J]. ACTA METALLURGICA SINICA,2017,53(5):524-530. |
APA | Li Jun,Liu Wenpeng,Ren Yibin,Shen Minggang,&Yang Ke.(2017).Preparation of Micro Porous Stainless Steel by Physical Vacuum Dealloying.ACTA METALLURGICA SINICA,53(5),524-530. |
MLA | Li Jun,et al."Preparation of Micro Porous Stainless Steel by Physical Vacuum Dealloying".ACTA METALLURGICA SINICA 53.5(2017):524-530. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment