Microstructure and Mechanical Properties of TC16 Titanium Alloy by Room Temperature Roller Die Drawing | |
Zhang Zhiqiang; Dong Limin; Guan Shaoxuan; Yang Rui | |
Corresponding Author | Dong Limin(lmdong@imr.ac.cn) |
2017-04-11 | |
Source Publication | ACTA METALLURGICA SINICA
![]() |
ISSN | 0412-1961 |
Volume | 53Issue:4Pages:415-422 |
Abstract | Grain refinement is a challenging topic to improve mechanical properties of metallic materials, especially for titanium alloys which show great potential in aerospace and medical implants areas due to the low density and good corrosion resistance. However, severe plastic deformation (SPD) technologies which have been commonly used in laboratory in smaller scale are difficult to be realized in industrial. Considerable researches are therefore paying attention to the development of new technologies for improvement of grain refinement at relatively lower strains. In this work, the dual phase TC16 titanium alloy showing excellent room temperature ductility was investigated with emphasis on the feasibility of producing ultrafine grains by roller die drawing at room temperature. The techniques of XRD, SEM, TEM, Vickers hardness test and tensile test were employed to analyze the phase constitutes, microstructure evolutions and preliminary mechanical properties of the alloy deformed at different conditions. Results reveal that TC16 titanium alloy mainly consists of alpha and beta phases after roller die drawing at room temperature, and a small quantity of stress-induced alpha" martensite can be additionally identified inside beta grains. The grain sizes of alpha phase and beta phase decrease with strain increasing, which result to enhanced tensile strength and Vickers hardness. Indeed, the fibrous morphology of both alpha phase and beta phase with 0.3 mu m in thickness and a high value of 365 HV in Vickers hardness were revealed at the applied true strain of 2.14. Ultra-fine grains evidenced by a near-ring SAED spots were therefore achieved in the present case. |
Keyword | TC16 titanium alloy roller die drawing microstructure mechanical property grain refinement |
Funding Organization | Doctoral Scientific Research Starting Foundation of Liaoning Province |
DOI | 10.11900/0412.1961.2016.00424 |
Indexed By | SCI |
Language | 英语 |
Funding Project | Doctoral Scientific Research Starting Foundation of Liaoning Province[20141143] |
WOS Research Area | Metallurgy & Metallurgical Engineering |
WOS Subject | Metallurgy & Metallurgical Engineering |
WOS ID | WOS:000399921900004 |
Publisher | SCIENCE PRESS |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.imr.ac.cn/handle/321006/124601 |
Collection | 中国科学院金属研究所 |
Corresponding Author | Dong Limin |
Affiliation | Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China |
Recommended Citation GB/T 7714 | Zhang Zhiqiang,Dong Limin,Guan Shaoxuan,et al. Microstructure and Mechanical Properties of TC16 Titanium Alloy by Room Temperature Roller Die Drawing[J]. ACTA METALLURGICA SINICA,2017,53(4):415-422. |
APA | Zhang Zhiqiang,Dong Limin,Guan Shaoxuan,&Yang Rui.(2017).Microstructure and Mechanical Properties of TC16 Titanium Alloy by Room Temperature Roller Die Drawing.ACTA METALLURGICA SINICA,53(4),415-422. |
MLA | Zhang Zhiqiang,et al."Microstructure and Mechanical Properties of TC16 Titanium Alloy by Room Temperature Roller Die Drawing".ACTA METALLURGICA SINICA 53.4(2017):415-422. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment