Non-monotonic radial distribution of tensile yielding strength in cold-drawn pearlitic wire | |
Zhao, Tian-Zhang1; Song, Hong-Wu2; Zhang, Shi-Hong2 | |
Corresponding Author | Zhao, Tian-Zhang(tzzhao@alum.imr.ac.cn) |
2018 | |
Source Publication | MATERIALS SCIENCE AND TECHNOLOGY
![]() |
ISSN | 0267-0836 |
Volume | 34Issue:1Pages:35-41 |
Abstract | It is commonly accepted that the surface layer in the cold-drawn pearlitic steel wire has a higher strength than the centre. In the present work, via testing the cold-drawn wire after removing the surface layer by an electrochemical method, it is discovered that the tensile yielding strength distributes non-monotonically from the surface to the centre. A valley is observed at the subsurface. It is found that the maximum accumulative strain during drawing occurs at the subsurface which leads to more hardening. The presence of residual stress after drawing reduces the tensile yielding stress. With increasing thickness of the removed layer, the tensile yielding stress increases monotonically. Finally, the only reason for the non-monotonic distribution of the tensile yielding stress is the strain path which the material at the sub-surface experiences in drawing and subsequent tension. It actually belongs to a reverse and a cross loading, which result in softening. |
Keyword | Pearlitic wire drawing strain path |
Funding Organization | NV BEKAERT SA (Belgium) ; National Natural Science Foundation of China ; Natural Science Foundation of Liaoning Province of China |
DOI | 10.1080/02670836.2017.1352642 |
Indexed By | SCI |
Language | 英语 |
Funding Project | NV BEKAERT SA (Belgium) ; National Natural Science Foundation of China[51605310] ; Natural Science Foundation of Liaoning Province of China[201601176] |
WOS Research Area | Materials Science ; Metallurgy & Metallurgical Engineering |
WOS Subject | Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
WOS ID | WOS:000424554000005 |
Publisher | TAYLOR & FRANCIS LTD |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.imr.ac.cn/handle/321006/125788 |
Collection | 中国科学院金属研究所 |
Corresponding Author | Zhao, Tian-Zhang |
Affiliation | 1.Shenyang Aerosp Univ, Shenyang 110136, Liaoning, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang, Liaoning, Peoples R China |
Recommended Citation GB/T 7714 | Zhao, Tian-Zhang,Song, Hong-Wu,Zhang, Shi-Hong. Non-monotonic radial distribution of tensile yielding strength in cold-drawn pearlitic wire[J]. MATERIALS SCIENCE AND TECHNOLOGY,2018,34(1):35-41. |
APA | Zhao, Tian-Zhang,Song, Hong-Wu,&Zhang, Shi-Hong.(2018).Non-monotonic radial distribution of tensile yielding strength in cold-drawn pearlitic wire.MATERIALS SCIENCE AND TECHNOLOGY,34(1),35-41. |
MLA | Zhao, Tian-Zhang,et al."Non-monotonic radial distribution of tensile yielding strength in cold-drawn pearlitic wire".MATERIALS SCIENCE AND TECHNOLOGY 34.1(2018):35-41. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment