IMR OpenIR
Realising equal strength welding to parent metal in precipitation-hardened Al-Mg-Si alloy via low heat input friction stir welding
Zeng, X. H.1,2; Xue, P.1; Wang, D.1; Ni, D. R.1; Xiao, B. L.1; Ma, Z. Y.1
通讯作者Xue, P.(pxue@imr.ac.cn) ; Ma, Z. Y.(zyma@imr.ac.cn)
2018
发表期刊SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
ISSN1362-1718
卷号23期号:6页码:478-486
摘要Two millimetres thick Al-Mg-Si (6061Al-T6) alloy plates were friction stir welded at various welding conditions. Under a low rotation rate of 400 rev min(-1) with rapid water cooling, the softening zone in the joint disappeared and a nanostructure with an average grain size of 80 nm was obtained in the stir zone (SZ). Therefore, a weld with equal strength to the parent metal (PM) was successfully achieved with the fracture occurring in the PM. Further, the average microhard-ness and ultimate tensile strength (UTS) of the SZs increased with the decreasing rotation rate and increasing cooling speed. The average microhardness and UTS of the SZ with nanostructure reached up to 134 HV and 505 MPa, respectively; though the initial strengthened precipitates disappeared. This work provides an effective strategy of achieving high property joints and enhancing the mechanical properties of precipitation-hardened Al alloys.
关键词Precipitation-hardened Al alloy friction stir welding nanostructured grains strength
DOI10.1080/13621718.2017.1415249
收录类别SCI
语种英语
WOS研究方向Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
WOS记录号WOS:000434196400004
出版者TAYLOR & FRANCIS LTD
引用统计
被引频次:20[WOS]   [WOS记录]     [WOS相关记录]
文献类型期刊论文
条目标识符http://ir.imr.ac.cn/handle/321006/128082
专题中国科学院金属研究所
通讯作者Xue, P.; Ma, Z. Y.
作者单位1.Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, 72 Wenhua Rd, Shenyang 110016, Liaoning, Peoples R China
2.Univ Chinese Acad Sci, Beijing, Peoples R China
推荐引用方式
GB/T 7714
Zeng, X. H.,Xue, P.,Wang, D.,et al. Realising equal strength welding to parent metal in precipitation-hardened Al-Mg-Si alloy via low heat input friction stir welding[J]. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING,2018,23(6):478-486.
APA Zeng, X. H.,Xue, P.,Wang, D.,Ni, D. R.,Xiao, B. L.,&Ma, Z. Y..(2018).Realising equal strength welding to parent metal in precipitation-hardened Al-Mg-Si alloy via low heat input friction stir welding.SCIENCE AND TECHNOLOGY OF WELDING AND JOINING,23(6),478-486.
MLA Zeng, X. H.,et al."Realising equal strength welding to parent metal in precipitation-hardened Al-Mg-Si alloy via low heat input friction stir welding".SCIENCE AND TECHNOLOGY OF WELDING AND JOINING 23.6(2018):478-486.
条目包含的文件
条目无相关文件。
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[Zeng, X. H.]的文章
[Xue, P.]的文章
[Wang, D.]的文章
百度学术
百度学术中相似的文章
[Zeng, X. H.]的文章
[Xue, P.]的文章
[Wang, D.]的文章
必应学术
必应学术中相似的文章
[Zeng, X. H.]的文章
[Xue, P.]的文章
[Wang, D.]的文章
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。