| Comparative Study on Corrosion Behavior of Cast and Forged Mg-5Y-7Gd-1Nd-0.5Zr Alloys | |
| Liu Jinhui1,2; Song Yingwei1; Shan Dayong1; Han En-Hou1 | |
| Corresponding Author | Song Yingwei(ywsong@imr.ac.cn) |
| 2018-08-11 | |
| Source Publication | ACTA METALLURGICA SINICA
 |
| ISSN | 0412-1961 |
| Volume | 54Issue:8Pages:1141-1149 |
| Abstract | Magnesium and its alloys have become increasingly attractive in the automotive, 3C products and aerospace industries because of their advantages such as low density and high specific strength. In recent years, rare earth-Mg alloys have attracted much attention due to their high mechanical properties at room and elevated temperatures. Adjusting the microstructures by deformation treatment is a common method to improve the mechanical properties of Mg alloys. The microstructure especially the size, volume fraction and distribution of second phases in rare earth-Mg alloys will be changed during deformation treatment, which has a great effect on the corrosion resistance of Mg alloys. However, the studies on the effect of deformation treatment on the corrosion resistance of rare earth-Mg alloys are far away from sufficient. In this work, the corrosion behavior of cast and forged Mg-5Y-7Gd-1Nd-0.5Zr ( EW75) alloys were studied by using SEM, XRD, mass loss measurements and electrochemical tests. The results indicate that the second phases are distributed along the grain boundaries of cast and forged EW75 alloys. Meanwhile, the second phases in forged EW75 alloy are finer and lower volume fraction than that in cast EW75 alloy. The micro-galvanic corrosion of the forged EW75 alloy is weaker in comparison with the cast EW75 alloy owing to the smaller size and lower volume fraction of second phases as well more compact surface film, resulting in the better corrosion resistance. |
| Keyword | Mg alloy cast forged second phase surface film micro-galvanic corrosion |
| Funding Organization | National Key Research and Development Program of China ; National Natural Science Foundation of China |
| DOI | 10.11900/0412.1961.2017.00484 |
| Indexed By | SCI |
| Language | 英语 |
| Funding Project | National Key Research and Development Program of China[2016YFB0301105] ; National Natural Science Foundation of China[51471174] |
| WOS Research Area | Metallurgy & Metallurgical Engineering |
| WOS Subject | Metallurgy & Metallurgical Engineering |
| WOS ID | WOS:000440832400007 |
| Publisher | SCIENCE PRESS |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/128963 |
| Collection | 中国科学院金属研究所 |
| Corresponding Author | Song Yingwei |
| Affiliation | 1.Chinese Acad Sci, Inst Met Res, Key Lab Nucl Mat & Safety Assessment, Shenyang 110016, Liaoning, Peoples R China 2.Northeastern Univ, Sch Mat Sci & Engn, Shenyang 110819, Liaoning, Peoples R China |
| Recommended Citation GB/T 7714 | Liu Jinhui,Song Yingwei,Shan Dayong,et al. Comparative Study on Corrosion Behavior of Cast and Forged Mg-5Y-7Gd-1Nd-0.5Zr Alloys[J]. ACTA METALLURGICA SINICA,2018,54(8):1141-1149. |
| APA | Liu Jinhui,Song Yingwei,Shan Dayong,&Han En-Hou.(2018).Comparative Study on Corrosion Behavior of Cast and Forged Mg-5Y-7Gd-1Nd-0.5Zr Alloys.ACTA METALLURGICA SINICA,54(8),1141-1149. |
| MLA | Liu Jinhui,et al."Comparative Study on Corrosion Behavior of Cast and Forged Mg-5Y-7Gd-1Nd-0.5Zr Alloys".ACTA METALLURGICA SINICA 54.8(2018):1141-1149. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment