| Modification of cryomilling process to tailor geometrical characteristics of nanostructured Al powder for cold spraying | |
| Feng, Bo1,2; Tariq, Naeem ul Haq1,2,4; Wang, Jiqiang1; Du, Hao1; Zang, Xusheng1,3; Xiong, Tianying1 | |
| Corresponding Author | Wang, Jiqiang(jqwang11s@imr.ac.cn) ; Xiong, Tianying(tyxiong@imr.ac.cn) |
| 2018-10-01 | |
| Source Publication | POWDER TECHNOLOGY
 |
| ISSN | 0032-5910 |
| Volume | 338Pages:173-179 |
| Abstract | Cryomilling is the most commonly used method to fabricate ultra-fine grained (UFG) or nanostructured metallic powder. However, it has relatively low control over powder's geometric characteristics, particularly for the powders having FCC crystal structure. This shortcoming makes traditional cryomilling process unattractive to produce UFG/nanostructured feedstock for cold spraying process. In the present work, a modified pot vibration milling process was successfully employed to produce nanostructured powder of pure aluminum at 100 K. The geometrical characteristics of Al powder was controlled by using various combinations of the milling media (i.e. steel balls) of different sizes. The results indicate that with increase in milling time, the initial grain size of Al (similar to 1-5 pm) was progressively refined to similar to 30-50 nm. Moreover, lamellar powder morphology was obtained with the addition of process control agent (PCA) while equiaxed polygonal structure was evolved without using PCA. It was also revealed that, in the absence of PCA, the particle size distribution was mainly controlled by the interstice size distribution of the milling media. (C) 2018 Elsevier B.V. All rights reserved. |
| Keyword | Cryomilling Cold spraying Nanostructured Al powder Powder morphology Powder size distribution |
| Funding Organization | National Natural Science Foundation of China |
| DOI | 10.1016/j.powtec.2018.07.007 |
| Indexed By | SCI |
| Language | 英语 |
| Funding Project | National Natural Science Foundation of China[51671205] |
| WOS Research Area | Engineering |
| WOS Subject | Engineering, Chemical |
| WOS ID | WOS:000447569200020 |
| Publisher | ELSEVIER SCIENCE BV |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/129937 |
| Collection | 中国科学院金属研究所 |
| Corresponding Author | Wang, Jiqiang; Xiong, Tianying |
| Affiliation | 1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China 2.Univ Chinese Acad Sci, 19 A Yuquan Rd, Beijing 100049, Peoples R China 3.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Liaoning, Peoples R China 4.Pakistan Inst Engn & Appl Sci, Dept Met & Mat Engn, Islamabad, Pakistan |
| Recommended Citation GB/T 7714 | Feng, Bo,Tariq, Naeem ul Haq,Wang, Jiqiang,et al. Modification of cryomilling process to tailor geometrical characteristics of nanostructured Al powder for cold spraying[J]. POWDER TECHNOLOGY,2018,338:173-179. |
| APA | Feng, Bo,Tariq, Naeem ul Haq,Wang, Jiqiang,Du, Hao,Zang, Xusheng,&Xiong, Tianying.(2018).Modification of cryomilling process to tailor geometrical characteristics of nanostructured Al powder for cold spraying.POWDER TECHNOLOGY,338,173-179. |
| MLA | Feng, Bo,et al."Modification of cryomilling process to tailor geometrical characteristics of nanostructured Al powder for cold spraying".POWDER TECHNOLOGY 338(2018):173-179. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment