The microstructure and tribological behavior of a pre-cold-deformed 0.90 % nitrogen containing stainless steel | |
Zhao, H.1,2; Ren, Y.2; Dong, J.2; Yang, K.2 | |
Corresponding Author | Ren, Y.(ybren@imr.ac.cn) |
2018-12-01 | |
Source Publication | MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK
![]() |
ISSN | 0933-5137 |
Volume | 49Issue:12Pages:1439-1448 |
Abstract | The microstructure of a 0.90 % nitrogen containing stainless steel pre-deformed by cold rolling was analyzed using optical microscopy, transmission electron microscopy and X-ray diffraction; Then the tribological behavior of nitrogen containing stainless steel was investigated using sliding wear method in air and in sodium chloride solutions and the worn surface was observed by a scanning electron microscopy. The results indicated that nitrogen containing stainless steel possessed stable single-phase austenite and the number of mechanical twins increased with increasing cold deformation. In dry wear tests, when the GCr15 bearing steel ball and 304 stainless steel ball acted as the counterpart, the wear resistance of nitrogen containing stainless steel decreased gradually and kept nearly the same, respectively, with increasing cold deformation. The corrosion wear resistance of nitrogen containing stainless steel was improved gradually by cold deformation in the 0.9 % sodium chloride solution and 3.5 % sodium chloride solution, while their friction coefficients were nearly equal. |
Keyword | Nitrogen containing stainless steel wear rate cold deformation friction coefficient microstructure |
Funding Organization | National Natural Science Foundation of China ; National Basic Research Program of China (973 Program) |
DOI | 10.1002/mawe.201700142 |
Indexed By | SCI |
Language | 英语 |
Funding Project | National Natural Science Foundation of China[31370976] ; National Basic Research Program of China (973 Program)[2012CB619101] |
WOS Research Area | Materials Science |
WOS Subject | Materials Science, Multidisciplinary |
WOS ID | WOS:000453236700002 |
Publisher | WILEY-V C H VERLAG GMBH |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.imr.ac.cn/handle/321006/130668 |
Collection | 中国科学院金属研究所 |
Corresponding Author | Ren, Y. |
Affiliation | 1.AECC Guizhou Liyang Aviat Power Co LTD, Guiyang 550014, Guizhou, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China |
Recommended Citation GB/T 7714 | Zhao, H.,Ren, Y.,Dong, J.,et al. The microstructure and tribological behavior of a pre-cold-deformed 0.90 % nitrogen containing stainless steel[J]. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK,2018,49(12):1439-1448. |
APA | Zhao, H.,Ren, Y.,Dong, J.,&Yang, K..(2018).The microstructure and tribological behavior of a pre-cold-deformed 0.90 % nitrogen containing stainless steel.MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK,49(12),1439-1448. |
MLA | Zhao, H.,et al."The microstructure and tribological behavior of a pre-cold-deformed 0.90 % nitrogen containing stainless steel".MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK 49.12(2018):1439-1448. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment