Design of New Al Photoanode Composite for Cathodic Protection Based on Photocatalytic Material and Sacrificial Anode | |
Xie, Xuan1; Liu, Li1; Chen, Runze2,3; Liu, Gang2; Li, Ying2; Wang, Fuhui1 | |
通讯作者 | Liu, Li(liuli@mail.neu.edu.cn) |
2019-02-06 | |
发表期刊 | JOURNAL OF THE ELECTROCHEMICAL SOCIETY
![]() |
ISSN | 0013-4651 |
卷号 | 166期号:5页码:H3215-H3222 |
摘要 | A new kind of Al photoanode composite based on photocatalytic material and sacrificial anode was proposed and designed to provide new ideas for cathodic protection in marine environment. Fabricated with the traditional Al-Zn-In-Mg-Ti sacrificial anode and Co(OH)(2) modified anatase TiO2 nanotubes, a new Al photoanode composite with good photoelectrochemical cathodic protection property was obtained. To compare with the traditional sacrificial anode, the cathodic protective properties of both the sacrificial anode and this Al photoanode composite were evaluated by electrochemical measurements in aqueous 3.5 wt.% NaCl solution. By means of scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and UV-Vis spectrophotometer morphologies, crystal structures, surface compositions and light response range of the Al photoanode composite during the immersion were characterized, respectively. The generated protective current density of the Al photoanode composite is found to be greater under illumination than that of the traditional Al-Zn-In-Mg-Ti sacrificial anode. Co(OH)(2)@TiO2 plays an important role in supplemental protection for Q235 carbon steel and improves the current efficiency. (C) The Author(s) 2019. Published by ECS. |
资助者 | National Natural Science Foundation of China |
DOI | 10.1149/2.0321905jes |
收录类别 | SCI |
语种 | 英语 |
资助项目 | National Natural Science Foundation of China[51622106] ; National Natural Science Foundation of China[51871049] |
WOS研究方向 | Electrochemistry ; Materials Science |
WOS类目 | Electrochemistry ; Materials Science, Coatings & Films |
WOS记录号 | WOS:000457977600001 |
出版者 | ELECTROCHEMICAL SOC INC |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.imr.ac.cn/handle/321006/131646 |
专题 | 中国科学院金属研究所 |
通讯作者 | Liu, Li |
作者单位 | 1.Northeastern Univ, Shenyang Natl Lab Mat Sci, Shenyang 110819, Liaoning, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China 3.Northeastern Univ, Sch Mat Sci & Engn, Inst Ceram & Powder Met, Shenyang 110819, Liaoning, Peoples R China |
推荐引用方式 GB/T 7714 | Xie, Xuan,Liu, Li,Chen, Runze,et al. Design of New Al Photoanode Composite for Cathodic Protection Based on Photocatalytic Material and Sacrificial Anode[J]. JOURNAL OF THE ELECTROCHEMICAL SOCIETY,2019,166(5):H3215-H3222. |
APA | Xie, Xuan,Liu, Li,Chen, Runze,Liu, Gang,Li, Ying,&Wang, Fuhui.(2019).Design of New Al Photoanode Composite for Cathodic Protection Based on Photocatalytic Material and Sacrificial Anode.JOURNAL OF THE ELECTROCHEMICAL SOCIETY,166(5),H3215-H3222. |
MLA | Xie, Xuan,et al."Design of New Al Photoanode Composite for Cathodic Protection Based on Photocatalytic Material and Sacrificial Anode".JOURNAL OF THE ELECTROCHEMICAL SOCIETY 166.5(2019):H3215-H3222. |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论