Powder Size Influence on Tensile Properties and Porosity for PM Ti2AlNb Alloy Prepared by Hot Isostatic Pressing | |
Lu, Zheng-Guan1,2; Wu, Jie1; Xu, Lei1; Yang, Rui1 | |
Corresponding Author | Xu, Lei(lxu@imr.ac.cn) |
2019-11-01 | |
Source Publication | ACTA METALLURGICA SINICA-ENGLISH LETTERS
![]() |
ISSN | 1006-7191 |
Volume | 32Issue:11Pages:1329-1336 |
Abstract | Pre-alloyed powder of Ti2AlNb alloy was prepared by electrode induction gas atomization method, and the powder was screened into five kinds of powder size distribution. Fully dense Ti2AlNb alloy was prepared by powder metallurgy (PM) using hot isostatic pressing. The properties of pre-alloyed powder and PM Ti2AlNb alloy were tested. Results show that mean grain size of PM Ti2AlNb alloy is influenced by powder particle size, but particle size has no significant influence on tensile properties. Finer Ti2AlNb powder has low Argon gas bubble ratio and high oxygen content, and poor flowability of finer powder increases the degree of difficulty during degassing. As a result, big pores (> 50 mu m) are observed in PM Ti2AlNb alloy prepared by finer powder and cause plasticity loss of tensile properties. In order to get a better comprehensive properties of PM Ti2AlNb alloy, powder with an average size (similar to 100 mu m) is suggested. |
Keyword | Ti2AlNb alloy Powder metallurgy Powder size distribution Hot isostatic pressing |
DOI | 10.1007/s40195-019-00928-w |
Indexed By | SCI |
Language | 英语 |
WOS Research Area | Metallurgy & Metallurgical Engineering |
WOS Subject | Metallurgy & Metallurgical Engineering |
WOS ID | WOS:000488930700003 |
Publisher | CHINESE ACAD SCIENCES, INST METAL RESEARCH |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.imr.ac.cn/handle/321006/135581 |
Collection | 中国科学院金属研究所 |
Corresponding Author | Xu, Lei |
Affiliation | 1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Liaoning, Peoples R China |
Recommended Citation GB/T 7714 | Lu, Zheng-Guan,Wu, Jie,Xu, Lei,et al. Powder Size Influence on Tensile Properties and Porosity for PM Ti2AlNb Alloy Prepared by Hot Isostatic Pressing[J]. ACTA METALLURGICA SINICA-ENGLISH LETTERS,2019,32(11):1329-1336. |
APA | Lu, Zheng-Guan,Wu, Jie,Xu, Lei,&Yang, Rui.(2019).Powder Size Influence on Tensile Properties and Porosity for PM Ti2AlNb Alloy Prepared by Hot Isostatic Pressing.ACTA METALLURGICA SINICA-ENGLISH LETTERS,32(11),1329-1336. |
MLA | Lu, Zheng-Guan,et al."Powder Size Influence on Tensile Properties and Porosity for PM Ti2AlNb Alloy Prepared by Hot Isostatic Pressing".ACTA METALLURGICA SINICA-ENGLISH LETTERS 32.11(2019):1329-1336. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment