| Effects of Temperature on Fretting Corrosion Between Alloy 690TT and 405 Stainless Steel in Pure Water | |
| Liu, Xing-Chen1,2; Ming, Hong-Liang1; Zhang, Zhi-Ming1; Wang, Jian-Qiu1; Tang, Li-Chen3; Qian, Hao3; Xie, Yong-Cheng3; Han, En-Hou1 | |
| Corresponding Author | Ming, Hong-Liang(hlming12s@imr.ac.cn) |
| 2019-12-01 | |
| Source Publication | ACTA METALLURGICA SINICA-ENGLISH LETTERS
 |
| ISSN | 1006-7191 |
| Volume | 32Issue:12Pages:1437-1448 |
| Abstract | In pressurized water reactor, fretting corrosion has become the main reason for the failure of 690TT heat exchanger tubes. The effect of temperature on the fretting corrosion behavior between 690TT tube and 405 stainless steel (SS) bar has been studied during 10(6) fretting cycles. The overall average coefficient of friction (COF) values descends with an increase in test temperature, while the width of worn scar becomes wider. The severest fretting corrosion happens when the test temperature is at 100 degrees C. The wear mechanism differs at different test temperatures, from adhesive wear at room temperature to abrasive wear and delamination at 100 degrees C, to abrasive wear at 200 degrees C. Deformation slips, high residual strain concentration, and micro-cracks are found which are disadvantageous for the further service performance of the tubes. |
| Keyword | Alloy 690TT 405 SS Fretting corrosion Temperature |
| Funding Organization | National Natural Science Foundation of China ; Large-scale advanced PWR major projects ; Liaoning Provincial Natural Science Foundation of China ; CAS Key laboratory of Nuclear Materials and Safety Assessment (Institute of Metal Research, Chinese Academy of Sciences, China) |
| DOI | 10.1007/s40195-019-00929-9 |
| Indexed By | SCI |
| Language | 英语 |
| Funding Project | National Natural Science Foundation of China[51771211] ; Large-scale advanced PWR major projects[2017ZX06002006] ; Liaoning Provincial Natural Science Foundation of China[20180540076] ; CAS Key laboratory of Nuclear Materials and Safety Assessment (Institute of Metal Research, Chinese Academy of Sciences, China)[2019NMSAKF02] ; CAS Key laboratory of Nuclear Materials and Safety Assessment (Institute of Metal Research, Chinese Academy of Sciences, China)[2017NMSAKF04] |
| WOS Research Area | Metallurgy & Metallurgical Engineering |
| WOS Subject | Metallurgy & Metallurgical Engineering |
| WOS ID | WOS:000495116000001 |
| Publisher | CHINESE ACAD SCIENCES, INST METAL RESEARCH |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/137003 |
| Collection | 中国科学院金属研究所 |
| Corresponding Author | Ming, Hong-Liang |
| Affiliation | 1.Chinese Acad Sci, Inst Met Res, CAS Key Lab Nucl Mat & Safety Assessment, Shenyang 110016, Liaoning, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Liaoning, Peoples R China 3.Shanghai Nucl Engn Res & Design Inst Ltd Co, Shanghai 200233, Peoples R China |
| Recommended Citation GB/T 7714 | Liu, Xing-Chen,Ming, Hong-Liang,Zhang, Zhi-Ming,et al. Effects of Temperature on Fretting Corrosion Between Alloy 690TT and 405 Stainless Steel in Pure Water[J]. ACTA METALLURGICA SINICA-ENGLISH LETTERS,2019,32(12):1437-1448. |
| APA | Liu, Xing-Chen.,Ming, Hong-Liang.,Zhang, Zhi-Ming.,Wang, Jian-Qiu.,Tang, Li-Chen.,...&Han, En-Hou.(2019).Effects of Temperature on Fretting Corrosion Between Alloy 690TT and 405 Stainless Steel in Pure Water.ACTA METALLURGICA SINICA-ENGLISH LETTERS,32(12),1437-1448. |
| MLA | Liu, Xing-Chen,et al."Effects of Temperature on Fretting Corrosion Between Alloy 690TT and 405 Stainless Steel in Pure Water".ACTA METALLURGICA SINICA-ENGLISH LETTERS 32.12(2019):1437-1448. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment