IMR OpenIR
Fabrication and Properties of Novel Multi-Layered Metal Composites
Zhang Le1,2; Wang Wei1,3; Shahzad, M. Babar1; Shan Yiyin1,3; Yang Ke1
Corresponding AuthorWang Wei(wangw@imr.ac.cn)
2020-03-11
Source PublicationACTA METALLURGICA SINICA
ISSN0412-1961
Volume56Issue:3Pages:351-360
AbstractWith the development of science and technology, more and more products with excellent quanlity and abundant functionalities have been exploited and provided. Inspired by the concept of "brick wall" structure or layer structure with alternated distribution of hard and soft phases discovered in nature creatures such as mother pearl shellfish, a entirely novel steel composite which not only can minimize the shortcomings of the original materials at the maximum extent, but also possess excellent mechanical performance as well as new physical properties, has been developed. Taking ultra-high strength maraging steel and 316L austenitic stainless steel as the original materials, the influence of deformation reduction under high vacuum on interfacial bonding strength and interface characteristics of heterogeneous multilayered metal composites was studied, and the fabrication feasibility of heterogeneous multi-layered metal composites was explored. The results showed that in the vacuum hot-pressing process, the interfaces under different deformations were clear and straight. Slight mutual diffusion phenomenon occurred in the hot-pressing process. Due to the difference of rheological properties of the original materials at high temperature, dynamic recovery and dynamic recrystallization occurred in the 316L layer, while deformed microstructure was dominant in the maraging steel layer. Combined with rolling process and heat treatment, bulk metal composites with 9 layers and 11 layers were prepared, respectively. The results of the three-point bending experiment showed that the crack occurred firstly at the outermost side of the multi-layer composites which withstood the tensile stress. Due to the passivation, delamination and bridging of heterogeneous interface in the multi-layer metal composites, the propagation path of crack was greatly extended and more energy was consumed, which showed excellent ability to block the crack propagation.
Keywordmaraging steel austenitic stainless steel multi-layer metal composite vacuum hot pressing interface characterization bending property
Funding OrganizationNational Natural Science Foundation of China ; National Natural Science Foundation of China Research Fund for International Young Scientists ; Youth Innovation Promotion Association of Chinese Academy of Sciences ; Innovation Project of Institute of Metal Research ; Shenyang Science and Technology Project
DOI10.11900/0412.1961.2019.00245
Indexed BySCI
Language英语
Funding ProjectNational Natural Science Foundation of China[51472249] ; National Natural Science Foundation of China Research Fund for International Young Scientists[51750110515] ; Youth Innovation Promotion Association of Chinese Academy of Sciences[2017233] ; Innovation Project of Institute of Metal Research[2015-ZD04] ; Shenyang Science and Technology Project[Z18-0-026]
WOS Research AreaMetallurgy & Metallurgical Engineering
WOS SubjectMetallurgy & Metallurgical Engineering
WOS IDWOS:000516751300009
PublisherSCIENCE PRESS
Citation statistics
Cited Times:2[WOS]   [WOS Record]     [Related Records in WOS]
Document Type期刊论文
Identifierhttp://ir.imr.ac.cn/handle/321006/137496
Collection中国科学院金属研究所
Corresponding AuthorWang Wei
Affiliation1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China
2.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Peoples R China
3.Chinese Acad Sci, Inst Met Res, Key Lab Nucl Mat & Safety Assessment, Shenyang 110016, Peoples R China
Recommended Citation
GB/T 7714
Zhang Le,Wang Wei,Shahzad, M. Babar,et al. Fabrication and Properties of Novel Multi-Layered Metal Composites[J]. ACTA METALLURGICA SINICA,2020,56(3):351-360.
APA Zhang Le,Wang Wei,Shahzad, M. Babar,Shan Yiyin,&Yang Ke.(2020).Fabrication and Properties of Novel Multi-Layered Metal Composites.ACTA METALLURGICA SINICA,56(3),351-360.
MLA Zhang Le,et al."Fabrication and Properties of Novel Multi-Layered Metal Composites".ACTA METALLURGICA SINICA 56.3(2020):351-360.
Files in This Item:
There are no files associated with this item.
Related Services
Recommend this item
Bookmark
Usage statistics
Export to Endnote
Google Scholar
Similar articles in Google Scholar
[Zhang Le]'s Articles
[Wang Wei]'s Articles
[Shahzad, M. Babar]'s Articles
Baidu academic
Similar articles in Baidu academic
[Zhang Le]'s Articles
[Wang Wei]'s Articles
[Shahzad, M. Babar]'s Articles
Bing Scholar
Similar articles in Bing Scholar
[Zhang Le]'s Articles
[Wang Wei]'s Articles
[Shahzad, M. Babar]'s Articles
Terms of Use
No data!
Social Bookmark/Share
All comments (0)
No comment.
 

Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.