| Finite element analysis of temperature and residual stress profiles of porous cubic Ti-6Al-4V titanium alloy by electron beam melting | |
| He, Xiaochun1; Li, Yang1; Bi, Yongjie1; Liu, Xiaomei1; Zhou, Bing1; Zhang, Shangzhou1; Li, Shujun2 | |
| Corresponding Author | Zhang, Shangzhou(szzhangyt@163.com) |
| 2020-05-01 | |
| Source Publication | JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
 |
| ISSN | 1005-0302 |
| Volume | 44Pages:191-200 |
| Abstract | The temperature and stress profiles of porous cubic Ti-6Al-4V titanium alloy grids by additive manufacturing via electron beam melting (EBM) based on finite element (FE) method were investigated. Three-dimensional FE models were developed to simulate the single-layer and five-layer girds under annular and lateral scanning. The results showed that the molten pool temperature in five-layer girds was higher than that in single-layer grids owing to the larger mass and higher heat capacity. More energies accumulated by the longer scanning time for annular path than lateral path led to the higher temperature and steeper temperature gradient. The thermal stress drastically fluctuated during EBM process and the residual stress decreased with the increase of powder layer where the largest stress appeared at the first layer along the build direction. The stress under lateral scanning was slightly larger but relatively more homogeneous distribution than those under annular scanning. The stress distribution showed anisotropy and the maximum Von Mises stress occurred around the central node. The stress profiles were explained by the temperature fields and grids structure. (C) 2020 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology. |
| Keyword | Electron beam melting Ti-6Al-4V titanium alloy Porous cubic grids Finite element analysis Temperature field Stress field |
| Funding Organization | Natural Science Foundation of Shandong Province, China ; Major Major Scientific and Technological Innovation Program of Shandong Province, China ; Key Research Program of Frontier Sciences, CAS ; National Natural Science Foundation of China |
| DOI | 10.1016/j.jmst.2020.01.033 |
| Indexed By | SCI |
| Language | 英语 |
| Funding Project | Natural Science Foundation of Shandong Province, China[ZR2019MEM012] ; Major Major Scientific and Technological Innovation Program of Shandong Province, China[2019JZZY010325] ; Key Research Program of Frontier Sciences, CAS[QYZDJ-SSW-JSC031-02] ; National Natural Science Foundation of China[51871220] |
| WOS Research Area | Materials Science ; Metallurgy & Metallurgical Engineering |
| WOS Subject | Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
| WOS ID | WOS:000522863000020 |
| Publisher | JOURNAL MATER SCI TECHNOL |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/138086 |
| Collection | 中国科学院金属研究所 |
| Corresponding Author | Zhang, Shangzhou |
| Affiliation | 1.Yantai Univ, Sch Nucl Equipment & Nucl Engn, Yantai 264005, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China |
| Recommended Citation GB/T 7714 | He, Xiaochun,Li, Yang,Bi, Yongjie,et al. Finite element analysis of temperature and residual stress profiles of porous cubic Ti-6Al-4V titanium alloy by electron beam melting[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,2020,44:191-200. |
| APA | He, Xiaochun.,Li, Yang.,Bi, Yongjie.,Liu, Xiaomei.,Zhou, Bing.,...&Li, Shujun.(2020).Finite element analysis of temperature and residual stress profiles of porous cubic Ti-6Al-4V titanium alloy by electron beam melting.JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,44,191-200. |
| MLA | He, Xiaochun,et al."Finite element analysis of temperature and residual stress profiles of porous cubic Ti-6Al-4V titanium alloy by electron beam melting".JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 44(2020):191-200. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment