| Mechanistic investigation of a low-alloy Mg-Ca-based extrusion alloy with high strength-ductility synergy | |
| Pan, Hucheng1; Kang, Rui1; Li, Jingren1; Xie, Hongbo2; Zeng, Zhuoran3; Huang, Qiuyan4; Yang, Changlin5; Ren, Yuping1; Qin, Gaowu2 | |
| Corresponding Author | Zeng, Zhuoran(zhuoran.zeng@monash.edu) ; Huang, Qiuyan(gyhuang16b@imr.ac.cn) ; Qin, Gaowu(qingw@smm.neu.edu.cn) |
| 2020-03-01 | |
| Source Publication | ACTA MATERIALIA
 |
| ISSN | 1359-6454 |
| Volume | 186Pages:278-290 |
| Abstract | High strength-ductility synergy is difficult to achieve in Mg alloys. Although high strength has been achieved through considerable alloying addition and low-temperature extrusion, these techniques result in low ductility (2%-5%). In this work, a novel low-alloy Mg-Ca-based alloy that overcomes this strength-ductility trade-off is designed. The alloy has an excellent tensile yield strength (similar to 425 MPa) and exhibits a reasonably high elongation capacity (similar to 11%). A microstructure examination reveals that a high density of submicron grains and nano-precipitates provides the alloy high strength, and the leaner alloy additions and higher extrusion temperatures initially improve ductility. As a result, the density of residual dislocations is reduced, and the formation of low-angle grain boundaries (LAGBs) is enhanced. With fewer residue dislocations, it becomes less probable for the newly activated mobile dislocations to be impeded and transformed into an immobile type during the subsequent tensile test. The LAGBs function as potential sites to emit new dislocations, thus enhancing the dislocation-multiplication capability. More importantly, they can induce evident sub-grain refinement hardening and guarantee that the alloy achieves high strength. The findings lead to a controllable Mg alloy design strategy that can simultaneously afford high strength and ductility. (C) 2020 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. |
| Keyword | Mg wrought alloy Mechanical property Low-angle grain boundary Dynamic recrystallisation Pyramidal dislocations |
| Funding Organization | National Key Research and Development Program of China ; National Natural Science Foundation of China ; Project of Promoting Talents in Liaoning province ; State Key Laboratory of Solidification Processing in NPU ; Fundamental Research Funds for the Central Universities |
| DOI | 10.1016/j.actamat.2020.01.017 |
| Indexed By | SCI |
| Language | 英语 |
| Funding Project | National Key Research and Development Program of China[2016YFB0701200] ; National Natural Science Foundation of China[51525101] ; National Natural Science Foundation of China[U1610253] ; National Natural Science Foundation of China[51701211] ; National Natural Science Foundation of China[51971053] ; Project of Promoting Talents in Liaoning province[XLYC1808038] ; State Key Laboratory of Solidification Processing in NPU[SKLSP201920] ; Fundamental Research Funds for the Central Universities[N170204011] |
| WOS Research Area | Materials Science ; Metallurgy & Metallurgical Engineering |
| WOS Subject | Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
| WOS ID | WOS:000518698300026 |
| Publisher | PERGAMON-ELSEVIER SCIENCE LTD |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/138127 |
| Collection | 中国科学院金属研究所 |
| Corresponding Author | Zeng, Zhuoran; Huang, Qiuyan; Qin, Gaowu |
| Affiliation | 1.Northeastern Univ, Sch Mat Sci & Engn, Key Lab Anisotropy & Texture Mat MoE, Shenyang 110819, Peoples R China 2.Northeastern Univ, State Key Lab Rolling & Automat, Shenyang 110819, Peoples R China 3.Monash Univ, Dept Mat Sci & Engn, Clayton, Vic 3800, Australia 4.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China 5.Northwestern Polytech Univ, State Key Lab Solidificat Proc, Xian 710072, Shaanxi, Peoples R China |
| Recommended Citation GB/T 7714 | Pan, Hucheng,Kang, Rui,Li, Jingren,et al. Mechanistic investigation of a low-alloy Mg-Ca-based extrusion alloy with high strength-ductility synergy[J]. ACTA MATERIALIA,2020,186:278-290. |
| APA | Pan, Hucheng.,Kang, Rui.,Li, Jingren.,Xie, Hongbo.,Zeng, Zhuoran.,...&Qin, Gaowu.(2020).Mechanistic investigation of a low-alloy Mg-Ca-based extrusion alloy with high strength-ductility synergy.ACTA MATERIALIA,186,278-290. |
| MLA | Pan, Hucheng,et al."Mechanistic investigation of a low-alloy Mg-Ca-based extrusion alloy with high strength-ductility synergy".ACTA MATERIALIA 186(2020):278-290. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment