| Tensile Properties of Selective Laser Melted 316L Stainless Steel | |
| Yu Chenfan1; Zhao Congcong1; Zhang Zhefeng2; Liu Wei1 | |
| 通讯作者 | Liu Wei(liuw_tsinghua@163.com) |
| 2020-05-11 | |
| 发表期刊 | ACTA METALLURGICA SINICA
 |
| ISSN | 0412-1961 |
| 卷号 | 56期号:5页码:683-692 |
| 摘要 | Selective laser melting (SLM), as the most common additive manufacturing (AM) method, is capable of manufacturing metallic components with complex shape layer by layer. Compared with conventional manufacturing technologies such as casting or forging, the SLM technology has the advantages of high degree accuracy, high material utilization rate and environmentally friendly, and has attracted great attention in the fields of aerospace, nuclear power and medicine. The 316L austenitic stainless steel is widely used in the industrial field because of the excellent corrosion resistance and plasticity. It is also one of the commonly used material systems for SLM. In this work, the tensile properties and fracture mechanism of 316L stainless steel fabricated via SLM technology were investigated. The microstructure of the SLMed 316L specimens after tensile fracture was characterized and analyzed. The results show that the SLMed 316L stainless steel has a relatively desirable combination of strength and ductility, and its tensile performance is obviously better than that of 316L stainless steel prepared by traditional methods. The nanometer-scale cell structure inside the grain contributes to the improvement of strength. Deformation twins were observed in the SLMed 316L stainless steel after tensile test. The appearance of twins is oriented-dependent, and it is easy to occur in the grain with the direction near <110>-<111>. |
| 关键词 | selective laser melting 316L stainless steel tensile property deformation twinning |
| 资助者 | National Magnetic Confinement Fusion Science Program of China |
| DOI | 10.11900/0412.1961.2019.00278 |
| 收录类别 | SCI |
| 语种 | 英语 |
| 资助项目 | National Magnetic Confinement Fusion Science Program of China[2014GB117000] |
| WOS研究方向 | Metallurgy & Metallurgical Engineering |
| WOS类目 | Metallurgy & Metallurgical Engineering |
| WOS记录号 | WOS:000529326900002 |
| 出版者 | SCIENCE PRESS |
| 引用统计 | |
| 文献类型 | 期刊论文 |
| 条目标识符 | http://ir.imr.ac.cn/handle/321006/138605 |
| 专题 | 中国科学院金属研究所 |
| 通讯作者 | Liu Wei |
| 作者单位 | 1.Tsinghua Univ, Sch Mat Sci & Engn, Beijing 100084, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Yu Chenfan,Zhao Congcong,Zhang Zhefeng,et al. Tensile Properties of Selective Laser Melted 316L Stainless Steel[J]. ACTA METALLURGICA SINICA,2020,56(5):683-692. |
| APA | Yu Chenfan,Zhao Congcong,Zhang Zhefeng,&Liu Wei.(2020).Tensile Properties of Selective Laser Melted 316L Stainless Steel.ACTA METALLURGICA SINICA,56(5),683-692. |
| MLA | Yu Chenfan,et al."Tensile Properties of Selective Laser Melted 316L Stainless Steel".ACTA METALLURGICA SINICA 56.5(2020):683-692. |
| 条目包含的文件 | 条目无相关文件。 | |||||
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。
修改评论