| Influence of Manufacturing Parameters on the Properties of Electron Beam Melted Ti-Ni Alloy | |
| Ren Dechun1,2; Zhang Huibo1; Zhao Xiaodong3; Wang Fuyu4; Hou Wentao1; Wang Shaogang1; Li Shujun1; Jin Wei1; Yang Rui1 | |
| Corresponding Author | Jin Wei(wjin@imr.ac.cn) |
| 2020-08-11 | |
| Source Publication | ACTA METALLURGICA SINICA
 |
| ISSN | 0412-1961 |
| Volume | 56Issue:8Pages:1103-1112 |
| Abstract | Electron beam melting (EBM) is one of the additive manufacturing technologies which can be used to fabricate the complex structure and shape samples. Until now, there are few literatures published about the properties of Ti-Ni samples produced by EBM. In this work, the influence of two important manufacturing parameters of focus offset (FO) and speed function (SF) on the density, phase content and transformation behavior, microstructure and mechanical properties was investigated for the equiatomic Ti-Ni shape memory alloy fabricated by EBM used DSC, XRD, SEM, TEM and electronic universal testing machine. The results showed that all the Ti-Ni samples had a high relative density beyond than 97% for fabricated by different combinations of FO and SF in the selected range. The corresponding phase transformation temperatures for all the Ti-Ni samples fabricated by EBM were higher than the prealloyed Ti-Ni powder, due to the effect of evaporation of Ni element higher than that of the formation of Nirich Ti,Ni phase during the quickly melting and solidification process. On the other hand, the EBM manufacturing parameters of FO and SF had limited influence on the phase contents, phase transformation temperatures and Vickers hardness. Due to the feature of the EBM fabricating method, the different types of defects would be introduced in the Ti-Ni solid samples. Though all the samples had similar high relative density, the performance of the compression behavior were shown great difference, and the crack defect had the larger effect than the gas and lack-of fusion porosities on the compression fracture stress and strain. |
| Keyword | electron beam melting Ti-Ni alloy manufacturing parameter microstructure compression property |
| Funding Organization | Strategic Priority Research Program of the Chinese Academy of Sciences |
| DOI | 10.11900/0412.1961.2019.00410 |
| Indexed By | SCI |
| Language | 英语 |
| Funding Project | Strategic Priority Research Program of the Chinese Academy of Sciences[No.XDA22010103] |
| WOS Research Area | Metallurgy & Metallurgical Engineering |
| WOS Subject | Metallurgy & Metallurgical Engineering |
| WOS ID | WOS:000550617100006 |
| Publisher | SCIENCE PRESS |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/139849 |
| Collection | 中国科学院金属研究所 |
| Corresponding Author | Jin Wei |
| Affiliation | 1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Peoples R China 3.Northeastern Univ, Sch Mat Sci & Engn, Key Lab Anisotropy & Texture Mat, Minist Educ, Shenyang 110819, Peoples R China 4.AVIC Shenyang Aircraft Design & Res Inst, Shenyang 110035, Peoples R China |
| Recommended Citation GB/T 7714 | Ren Dechun,Zhang Huibo,Zhao Xiaodong,et al. Influence of Manufacturing Parameters on the Properties of Electron Beam Melted Ti-Ni Alloy[J]. ACTA METALLURGICA SINICA,2020,56(8):1103-1112. |
| APA | Ren Dechun.,Zhang Huibo.,Zhao Xiaodong.,Wang Fuyu.,Hou Wentao.,...&Yang Rui.(2020).Influence of Manufacturing Parameters on the Properties of Electron Beam Melted Ti-Ni Alloy.ACTA METALLURGICA SINICA,56(8),1103-1112. |
| MLA | Ren Dechun,et al."Influence of Manufacturing Parameters on the Properties of Electron Beam Melted Ti-Ni Alloy".ACTA METALLURGICA SINICA 56.8(2020):1103-1112. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment