In-situ EIS study on the initial corrosion evolution behavior of SAC305 solder alloy covered with NaCl solution

doi:10.1016/j.jallcom.2020.156953

IMR OpenIR

	In-situ EIS study on the initial corrosion evolution behavior of SAC305 solder alloy covered with NaCl solution
	Qiao, Chuang 1,2; Wang, Mingna 3; Hao, Long 2,4; Jiang, Xiaolin 1; Liu, Xiahe 1; Thee, Chowwanonthapunya 5; An, Xizhong 1
通讯作者	Hao, Long(chinahaolong@126.com)
	2021-01-25
发表期刊	JOURNAL OF ALLOYS AND COMPOUNDS
ISSN	0925-8388
卷号	852 页码:12
摘要	The corrosion performance of SAC305 solder joints is closely related to the working efficiency and lifespan of electronic devices. Available studies on corrosion of SAC305 solder have seldom concentrated on its initial corrosion evolution behavior, which is critical in understanding its corrosion behavior in the long run. In this work, comb-like electrodes have been designed for in situ EIS measurements to investigate the initial corrosion evolution process of SAC305 solder covered with 3.5 wt.% NaCl solution, and Raman, XRD, SEM and EPMA have also been employed to characterize the formed corrosion product layer. The results indicate that the initial corrosion evolution behavior of SAC305 solder mainly involves four stages, i.e. the corrosion degradation of the pre-existing SnO2 protective film in a short duration in contact with NaCl solution, the anodically dissolved Sn2+ undergoes hydrolysis under the effect of Cl- in electrolyte to form stannous hydroxychloride intermediates of various structures, the formation of Sn3O2(OH)(2) from stannous hydroxychloride intermediates after Cl- releasing, and finally the formation of nano-SnO2 particles from Sn3O2 (OH)(2) after steps of dehydration and oxidation. Meanwhile, the acidified NaCl electrolyte can make the formed SnO2 slightly dissolved and favors the formation of SnCl4 center dot 4H(2)O crystals. These findings clearly demonstrate the initial corrosion evolution behavior and corrosion product formation mechanism of SAC305 solder, and are expected to provide potential guidelines on maintenance of microelectronic devices in marine atmosphere. (C) 2020 Elsevier B.V. All rights reserved.
关键词	SAC305 solder Marine atmosphere Atmospheric corrosion Comb-like electrode Corrosion evolution
资助者	National Natural Science Foundation of China ; Marine Science Special Project of Hebei Normal University of Science Technology
DOI	10.1016/j.jallcom.2020.156953
收录类别	SCI
语种	英语
资助项目	National Natural Science Foundation of China[51601057] ; Marine Science Special Project of Hebei Normal University of Science Technology[2018HY004]
WOS研究方向	Chemistry ; Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目	Chemistry, Physical ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000579878700036
出版者	ELSEVIER SCIENCE SA
引用统计	被引频次：38[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/141020
专题	中国科学院金属研究所
通讯作者	Hao, Long
作者单位	1.Northeastern Univ, Sch Met, Shenyang 110819, Peoples R China 2.Chinese Acad Sci, Environm Corros Ctr Mat, Inst Met Res, Shenyang 110016, Peoples R China 3.Hebei Normal Univ Sci & Technol, Dept Phys, Qinhuangdao 066004, Hebei, Peoples R China 4.Univ Sci & Technol China, Sch Mat Sci & Engn, Hefei 230026, Peoples R China 5.Kasetsart Univ, Fac Int Maritime Studies, Sriracha 20230, Chonburi, Thailand
推荐引用方式 GB/T 7714	Qiao, Chuang,Wang, Mingna,Hao, Long,et al. In-situ EIS study on the initial corrosion evolution behavior of SAC305 solder alloy covered with NaCl solution[J]. JOURNAL OF ALLOYS AND COMPOUNDS,2021,852:12.
APA	Qiao, Chuang.,Wang, Mingna.,Hao, Long.,Jiang, Xiaolin.,Liu, Xiahe.,...&An, Xizhong.(2021).In-situ EIS study on the initial corrosion evolution behavior of SAC305 solder alloy covered with NaCl solution.JOURNAL OF ALLOYS AND COMPOUNDS,852,12.
MLA	Qiao, Chuang,et al."In-situ EIS study on the initial corrosion evolution behavior of SAC305 solder alloy covered with NaCl solution".JOURNAL OF ALLOYS AND COMPOUNDS 852(2021):12.