热处理温度对S355J2W耐候钢板组织和性能的影响

IMR OpenIR

	热处理温度对S355J2W耐候钢板组织和性能的影响
其他题名	Effect of heat treatment temperature on microstructure and properties of S355J2W weathering resistant steel plate
	姜海昌 1; 封辉 1; 潘雪新 1; 胡小锋 1; 付鸿 1; 黄耀 2; 韩军科 2
	2018
发表期刊	金属热处理
ISSN	0254-6051
卷号	43.0 期号:006 页码:122-125
摘要	研究了热轧态S355J2W耐候钢板在300~880℃范围内不同温度加热20 min后空冷热处理的组织和性能。结果表明：热轧态S355J2W钢板中存在一定的变形晶粒,在较低温度退火时（300~650℃）,钢板中的铁素体发生再结晶和晶粒长大,逐步变为等轴晶。当热处理温度超过共析转变温度但未能达到完全奥氏体化温度时,部分未溶碳化物残留下来。当对钢板进行880℃的正火处理时,钢板完全奥氏体化,这些奥氏体在随后冷却过程发生了伪共析转变,形成大片珠光体＋铁素体,且形成的铁素体晶粒尺寸远大于再结晶晶粒。随着热处理温度的升高,钢板的屈服强度呈现增加的趋势,但当热处理温度达到800℃以上时,钢板的物理屈服消失,抗拉强度陡升,屈强比降低,伸长率下降。三维原子探针结果表明,铁素体内碳原子的局部匮乏是钢板物理屈服消失的主要原因。
其他摘要	Microstructure and properties of S355 J2 W weathering steel plate heat treated at different temperatures for 20 min were studied.The results show that after annealing treated at the range of 300-650 ℃,the ferrite of the S355 J2 W plate turns to be the equiaxial grains and the grain size is increased. When the temperature is higher than Ac1 temperature but lower than Ac3 temperature,the undissolved carbide will be retained. If the plate is treated at 880℃,which is complete austenitizing temperature,the microstructures are composed of large lamellar ferrite and pearlite. After normalizing treatment,the austenite the ferrite grain size from pseudo-eutectoid transition is larger than that of recrystallized ferrite grain. Along with the rise of temperature,the yield strength of the plate is increased. However,the yield phenomenon disappears and the mechanical properties of S355 J2 W decrease obviously when the temperature is higher than 800 ℃. The3-demesion atom probe（ 3 DAP） results indicate that the local deprivation of C in ferrite can be considered as the main reason for the disappear of physical yield.
关键词	S355J2W耐候钢板热处理温度组织力学性能
收录类别	CSCD
语种	中文
CSCD记录号	CSCD:6274247
引用统计	被引频次：3[CSCD] [CSCD记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/144543
专题	中国科学院金属研究所
作者单位	1.中国科学院金属研究所 2.中国电力科学研究院
推荐引用方式 GB/T 7714	姜海昌,封辉,潘雪新,等. 热处理温度对S355J2W耐候钢板组织和性能的影响[J]. 金属热处理,2018,43.0(006):122-125.
APA	姜海昌.,封辉.,潘雪新.,胡小锋.,付鸿.,...&韩军科.(2018).热处理温度对S355J2W耐候钢板组织和性能的影响.金属热处理,43.0(006),122-125.
MLA	姜海昌,et al."热处理温度对S355J2W耐候钢板组织和性能的影响".金属热处理 43.0.006(2018):122-125.