电弧离子镀梯度(Ti,Al)N薄膜的结构与抗氧化性能 | |
Alternative Title | STRUCTURE AND OXIDATION BEHAVIOR OF GRADIENT (Ti, Al)N FILM PREPARED BY ARC ION PLATING |
冯长杰; 辛丽; 李明升; 朱圣龙; 王福会 | |
2008 | |
Source Publication | 中国腐蚀与防护学报
![]() |
ISSN | 1005-4537 |
Volume | 28.0Issue:1.0Pages:1-6 |
Abstract | 采用电弧离子镀(AIP)技术在航空发动机压气机用1Cr11Ni2W2MoV不锈钢上沉积(Ti,Al)N梯度薄膜,并研究其微观结构和高温抗氧化性能。结果表明,薄膜均匀致密,与基体结合良好;薄膜为B1型(NaCl)单相结构,具有(220)择优取向;薄膜是内层富TiN、外层富(Ti,Al)N的梯度薄膜;梯度薄膜在700℃和800oC氧化后,表层形成富Al2O3的保护膜,在700℃较长时间内和800℃短时间内对不锈钢基体具有良好的保护作用。 |
Other Abstract | Gradient (Ti,Al)N film was deposited on 1Crl 1Ni2W2MoV stainless steel for aero-engine compressor blades by arc ion plating. The microstructure of the film and the high temperature oxidation behavior of the coated steel were studied results showed that the gradient film had a B1 (NaCl) structure with (220) preferred orientation, and with inner layer rich in TiN and outer layer rich in (Ti ,Al)N. The film was very dense and adhensiwe.The oxidation results indicated that the gradient films were protective at 700 ℃ for long time and at 800 ℃ for short time. It was found that protective layers rich in amorphous alumina formed on top of the gradient (Ti,Al)N film during the elevated temperature oxidation which protected the film from further oxidation |
Keyword | 电弧离子镀 梯度(Ti Al)N薄膜 结构 氧化 |
Indexed By | CSCD |
Language | 中文 |
CSCD ID | CSCD:3247669 |
Citation statistics |
Cited Times:4[CSCD]
[CSCD Record]
|
Document Type | 期刊论文 |
Identifier | http://ir.imr.ac.cn/handle/321006/145641 |
Collection | 中国科学院金属研究所 |
Affiliation | 中国科学院金属研究所 |
Recommended Citation GB/T 7714 | 冯长杰,辛丽,李明升,等. 电弧离子镀梯度(Ti,Al)N薄膜的结构与抗氧化性能[J]. 中国腐蚀与防护学报,2008,28.0(1.0):1-6. |
APA | 冯长杰,辛丽,李明升,朱圣龙,&王福会.(2008).电弧离子镀梯度(Ti,Al)N薄膜的结构与抗氧化性能.中国腐蚀与防护学报,28.0(1.0),1-6. |
MLA | 冯长杰,et al."电弧离子镀梯度(Ti,Al)N薄膜的结构与抗氧化性能".中国腐蚀与防护学报 28.0.1.0(2008):1-6. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment