A Newly Developed Wrought Ni–Fe–Cr-based Superalloy for Advanced Ultra-Supercritical Power Plant Applications Beyond 700 °C | |
Alternative Title | A Newly Developed Wrought Ni–Fe–Cr-based Superalloy for Advanced Ultra-Supercritical Power Plant Applications Beyond 700 °C |
Guan Shuai; Cui Chuanyong | |
2015 | |
Source Publication | Acta Metallurgica Sinica(English Letters)
![]() |
ISSN | 1006-7191 |
Volume | 28Issue:9Pages:1083-1088 |
Abstract | Some existing wrought Ni–Cr–Co-based superalloys are being evaluated as the candidate materials for advanced ultra-supercritical power plant applications beyond 700 °C due to their high creep strength. But they are all prohibitively expensive due to the addition of Co, Mo and W. Here we developed a new Ni–Fe–Cr-based superalloy (named as HT700 alloy) with low cost and high strength. This paper reports the mechanical properties and fracture modes of HT700 alloy to support its high temperature applications and to understand prospective failure mechanism. Fractographic examinations indicate that the fracture modes shift with test condition change. In addition, the HT700 alloy has relatively stable microstructure at 750 °C. Compared with IN740 and GH2984 alloys, this new alloy has higher yield strength in the temperature range from room temperature to 800 °C. The creep life of this new alloy is much longer than that of the Ni–Fe-based superalloy GH2984. The results suggest that this new alloy is a promising material for advanced ultra-supercritical power plant applications beyond 700 °C. |
Other Abstract | Some existing wrought Ni–Cr–Co-based superalloys are being evaluated as the candidate materials for advanced ultra-supercritical power plant applications beyond 700 °C due to their high creep strength. But they are all prohibitively expensive due to the addition of Co, Mo and W. Here we developed a new Ni–Fe–Cr-based superalloy (named as HT700 alloy) with low cost and high strength. This paper reports the mechanical properties and fracture modes of HT700 alloy to support its high temperature applications and to understand prospective failure mechanism. Fractographic examinations indicate that the fracture modes shift with test condition change. In addition, the HT700 alloy has relatively stable microstructure at 750 °C. Compared with IN740 and GH2984 alloys, this new alloy has higher yield strength in the temperature range from room temperature to 800 °C. The creep life of this new alloy is much longer than that of the Ni–Fe-based superalloy GH2984. The results suggest that this new alloy is a promising material for advanced ultra-supercritical power plant applications beyond 700 °C. |
Keyword | Wrought Ni–Fe–Cr-based superalloy Low cost High strength Fracture mode |
Indexed By | CSCD |
Language | 英语 |
CSCD ID | CSCD:5543503 |
Citation statistics |
Cited Times:5[CSCD]
[CSCD Record]
|
Document Type | 期刊论文 |
Identifier | http://ir.imr.ac.cn/handle/321006/150626 |
Collection | 中国科学院金属研究所 |
Affiliation | 中国科学院金属研究所 |
Recommended Citation GB/T 7714 | Guan Shuai,Cui Chuanyong. A Newly Developed Wrought Ni–Fe–Cr-based Superalloy for Advanced Ultra-Supercritical Power Plant Applications Beyond 700 °C[J]. Acta Metallurgica Sinica(English Letters),2015,28(9):1083-1088. |
APA | Guan Shuai,&Cui Chuanyong.(2015).A Newly Developed Wrought Ni–Fe–Cr-based Superalloy for Advanced Ultra-Supercritical Power Plant Applications Beyond 700 °C.Acta Metallurgica Sinica(English Letters),28(9),1083-1088. |
MLA | Guan Shuai,et al."A Newly Developed Wrought Ni–Fe–Cr-based Superalloy for Advanced Ultra-Supercritical Power Plant Applications Beyond 700 °C".Acta Metallurgica Sinica(English Letters) 28.9(2015):1083-1088. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment